1965 Ford 289 Master Engine Bolt Kit Alum Water Pump ALT AC

1965 Ford 289 Master Engine Bolt Kit Alum Water Pump ALT & AC | AMK 65O-SBAA
DESCRIPTION

Restore your 1965 Ford 289 engine hardware with this Master Engine Kit from AMK Products.

This kit is designed for 1965 289 engines with aluminum water pump, alternator, and air conditioning applications.

This 151-piece kit includes OEM-correct fasteners for the air cleaner, air cleaner heat shroud, carburetor, crank pulley, crankshaft damper, distributor, engine block drain plugs, engine fan, fan clutch, exhaust manifolds, fuel pump, ignition coil bracket, intake manifold, oil pan, starter, engine ID tag, timing cover, valve covers, water neck, aluminum water pump, and related engine components.

Each fastener is selected for proper fit, finish, head marking, and factory-style appearance.

This kit is ideal for restorers replacing missing, rusty, incorrect, or mismatched engine hardware while maintaining correct factory detail.
 
PRODUCT DETAILS

Application: 1965 Ford

Engine: 289

Water Pump: Aluminum Water Pump

Accessory Drive: Alternator with A/C

Kit Type: Master Engine Kit

Manufacturer: AMK Products

Fastener Style: OEM-correct engine restoration hardware

Quantity: 151 pieces

SKU: 65O-SBAA
 
WHAT’S INCLUDED

65O-SBAA - MASTER ENGINE KIT, 1965 289 ALUM WP w ALT & AC | Contains the sub-kits listed below | Qty 151

F-375 - AIR CLEANER - ALL V8 | Stamped wing nut only | Qty 1

F-547 - AIR CLEANER HEAT SHROUD - 260/289 | Hex clear stud, nut, flat washer | Qty 3

F-1125 - CARBURETOR - 1.0 INCH SPACER | Studs, 7/16 AF nuts | Qty 8

F-509 - CRANK PULLEY - ALL | Place bolts | Qty 3

F-1191 - CRANKSHAFT DAMPER - V8 | Hex bolt, flat washer | Qty 2

F-458 - DISTRIBUTOR - 6 CYL & ALL V8 | Hex split SEMS | Qty 1

F-645 - DISTRIBUTOR POINTS & CONDENSER - SINGLE | Slotted pan C screws | Qty 3

F-751 - DISTRIBUTOR VACUUM UNIT | Slotted pan screws | Qty 2

F-1389 - ENGINE BLOCK DRAIN PLUGS | External hex pipe plug | Qty 2

F-1201 - ENGINE FAN TO CLUTCH | Hex split SEMS, zinc | Qty 4

F-1804 - ENGINE FAN CLUTCH TO WATER PUMP | 7/16 inch hex split SEMS, SEMS, zinc | Qty 4

F-555 - EXHAUST MANIFOLDS - 260/289 | Hex bolts marked F, lock tabs, flat washers | Qty 40

F-519 - FUEL PUMP - V8 EXCEPT 351C | Hex split SEMS | Qty 2

F-420 - IGNITION COIL STRAP & BRACKET - ALL V8 | Hex split SEMS, HXWA screw, hex nut | Qty 3

F-478 - INTAKE MANIFOLD - 260/289 | Hex flat SEMS with sealing washers | Qty 12

F-484 - OIL PAN - 260/289/302/351W | Hex conical SEMS | Qty 22

F-1409 - STARTER - 260/289/302/351 | HXWA split SEMS, silver zinc | Qty 2

F-569 - ENGINE ID TAG - 260/289/302 | Hex bolt | Qty 1

F-489 - TIMING COVER - 260/289 WITH ALTERNATOR | Hex flange bolts, 5 short and 1 long | Qty 6

F-481 - VALVE COVERS, STEEL - 289/302/351W | Hex conical SEMS | Qty 12

F-506 - WATER NECK - 260/289/351W | Hex split SEMS | Qty 2

F-492 - WATER PUMP, ALUMINUM - 260/289 ALT & AC | Hex flange, hex and place bolts, spacer | Qty 16
 
VEHICLE FITMENT

1965 Ford applications with 289 V8 engine

Fits aluminum water pump with alternator and air conditioning applications.
 
COMMON USES

1965 289 engine fastener replacement

289 V8 engine rebuild hardware replacement

Aluminum water pump, alternator, and A/C engine hardware restoration

Air cleaner, carburetor, distributor, exhaust manifold, fuel pump, intake manifold, oil pan, starter, timing cover, valve cover, water neck, and water pump hardware replacement

Concours-quality and driver-quality Ford restoration projects

Replacing missing, rusty, incorrect, or mismatched engine fasteners
 
FAQ

Q: What does this master engine kit fit?

A: This kit is designed for 1965 Ford 289 V8 applications with aluminum water pump, alternator, and A/C setup.
 
Q: Is this an AMK Products kit?

A: Yes. This Master Engine Kit is manufactured by AMK Products.
 
Q: How many pieces are included?

A: This kit includes 151 pieces.
 
Q: Is this for the aluminum water pump setup?

A: Yes. This kit is for aluminum water pump applications with alternator and air conditioning.
 
Q: Is this the same as the non-A/C version?

A: No. This version is for alternator and A/C applications and includes the correct water pump hardware for that setup.
 
Q: Is this good for concours restorations?

A: Yes. This kit is a strong choice for restorers who want OEM-correct fasteners, correct finishes, and factory-style engine detail.
 
Q: Where does this ship from?

A: Ships from Winchester, VA.
 
Manufactured by AMK Products.

Ships from Winchester, VA.

We won’t screw you, but our fasteners will.™