1965 Mustang Master Chassis Kit 260/289 Drum Brake

1965 Mustang Master Chassis Kit 260/289 Drum Brake | AMK 65Z-DRSB
Restore your 1965 Ford Mustang 260/289 V8 drum brake chassis with this Master Chassis Kit from AMK Products. This kit includes OEM-correct fasteners for suspension, steering, drum brakes, rear axle, drivetrain mounting, fuel tank, single exhaust hangers, parking brake hardware, power steering components, and related chassis components.
Each fastener is selected for proper fit, finish, head marking, and factory-style appearance. This 337-piece kit is ideal for restorers replacing missing, rusty, incorrect, or mismatched chassis hardware while maintaining correct factory detail.

PRODUCT DETAILS
Application: 1965 Ford Mustang
Engine: 260/289 V8
Brake Type: Drum Brake
Kit Type: Master Chassis Kit
Manufacturer: AMK Products
Fastener Style: OEM-correct chassis restoration hardware
Quantity: 337 pieces
SKU: 65Z-DRSB

WHAT’S INCLUDED
65Z-DRSB - MASTER CHASSIS KIT, 1965 MUSTANG DRUM BRAKE 260/289 | Contains the sub-kits listed below | Qty 337
F-746 - ACCELERATOR BELLCRANK TO FIREWALL - 8 CYLINDER | HXWA A screws | Qty 3
F-1441 - AXLE HOUSING TO SPRINGS | 5.0 inch U-bolts, flange nuts | Qty 12
F-1439 - AXLE RETAINER PLATES - 8 CYLINDER | T-bolts, cad lock nuts | Qty 16
F-1616 - FRONT DRUM BRAKE ASSEMBLY TO SPINDLE | T-bolts, lock nuts | Qty 16
F-573 - BRAKE CABLES TO BODY | HXWA AB screws, retainers, nut | Qty 12
F-579 - BRAKE DRUM RETAINERS | Green push-on retainers | Qty 6
F-1150 - FRONT BRAKE HOSE BRACKETS TO BODY | Hex head C screws | Qty 2
F-576 - BRAKE HOSES TO BRACKET | U-clips | Qty 3
F-669 - BRAKE PLATE ADJUST HOLE PLUGS | Rubber plugs | Qty 2
F-594 - COIL SPRING SEATS - NUTS ONLY | 3/8-24 Marsden nuts | Qty 4
F-1111 - LOWER CONTROL ARMS | Hex bolts, nuts, split washers | Qty 6
F-3658 - UPPER CONTROL ARMS | Grade 8 1/2-20 knurled bolts, flange nuts | Qty 8
F-1280 - FRONT TUBULAR CROSSMEMBER | Special hex countersunk bolts | Qty 2
F-598 - DIFFERENTIAL CARRIER TO HOUSING | Cad lock nuts, copper washers | Qty 20
F-1305 - DISTRIBUTION BLOCK TO APRON | Hex C screw | Qty 1
F-1273 - DRIVESHAFT - V8, 6 CYL 67-68 A/T, ALL 69 AND UP | 5/16 inch U-bolts, lock nuts | Qty 6
F-804 - ENGINE BODY BRACKETS - ALL | Pointed HXWA B bolts with RBW marking, flange nuts | Qty 12
F-1310 - ENGINE INSULATOR TO BLOCK - 260/289 | Hex bolts, split washers | Qty 8
F-803 - ENGINE INSULATOR TO BODY BRACKETS - 289 | Lock nuts, flat washers | Qty 8
F-1245 - SINGLE EXHAUST HANGERS | Hex C screws | Qty 6
F-225 - GAS TANK | HXWA A screws | Qty 11
F-412 - GAS TANK FILLER NECK WITH TWIST CAP | HXWA B screws | Qty 5
F-571 - CHASSIS GREASE PLUGS | Hex plugs | Qty 9
F-351 - IDLER ARM | Hex bolts with F marking, lock nuts, clipped washers | Qty 6
F-1064 - LEAF SPRING MOUNTING AT FRONT | Pointed hex bolts, flange nuts, washers | Qty 6
F-1431 - MASTER CYLINDER WITHOUT POWER BRAKES | Hex split SEMS | Qty 2
F-1324 - POWER STEERING CYLINDER BRACKET TO BODY | Hex bolts with F marking, hex nuts, washers | Qty 8
F-1803 - POWER STEERING HOSE SUPPORT INSULATOR RETAINER | HXWA F screw | Qty 1
F-800 - PARKING BRAKE CONTROL TO BODY | Phillips pan external SEMS, caged and lock nuts | Qty 8
F-613 - PITMAN ARM TO GEAR BOX WITH 1.0 SHAFT | 1 1/8 AF hex jam nut, split washer | Qty 2
F-664 - REAR SHACKLE ASSEMBLY - NUTS ONLY | Marsden nuts | Qty 4
F-311 - FRONT SHOCK BRACKETS | Low-head carriage bolts, external KEPS nuts | Qty 12
F-343 - FRONT SHOCKS | External hex SEMS with SEMS marking, lock nuts, washers | Qty 12
F-1443 - FRONT STABILIZER BAR BRACKETS | Hex bolts, lock nuts | Qty 8
F-3951 - FRONT STABILIZER BAR END LINKS | Bolts, retainers, bushings, spacers, nuts | Qty 22
F-347 - STEERING GEAR BOX | Hex bolts, clipped flat washers, split washers | Qty 9
F-1302 - STEERING LINKAGE - 289 WITH POWER STEERING | Slotted nuts, cotter pins, flat washers | Qty 25
F-1464 - STRUT ROD THREADED ENDS TO BODY | 9/16-18 lock nuts | Qty 2
F-1156 - STRUT RODS TO LOWER CONTROL ARM | Hex bolts, lock nuts | Qty 8
F-1486 - REAR SUSPENSION BUMPER - 65-66 V8, 67-68 289-2V | Hex screws | Qty 2
F-2946 - FRONT SUSPENSION BUMPERS | External KEPS nuts | Qty 2
F-1467 - TRANSMISSION CROSSMEMBER | Pointed flange bolts, lock nuts, washers | Qty 5
F-3912 - WHEEL CYLINDERS - 250 AND ALL 8 CYLINDER | 5/16-18 hex external SEMS | Qty 8

VEHICLE FITMENT
1965 Ford Mustang
Fits 260/289 V8 drum brake applications.

COMMON USES
1965 Mustang chassis fastener replacement
260/289 V8 Mustang suspension and steering restoration
Drum brake chassis hardware replacement
Brake assembly, brake hose, parking brake, brake cable, and master cylinder hardware replacement
Rear axle, leaf spring, control arm, shock, stabilizer bar, and steering gear hardware restoration
Power steering cylinder bracket and steering linkage hardware replacement
Fuel tank, single exhaust hanger, transmission crossmember, and engine mount hardware replacement
Concours-quality and driver-quality Mustang restoration projects
Replacing missing, rusty, incorrect, or mismatched chassis fasteners

FAQ
Q: What does this master chassis kit fit?
A: This kit is designed for 1965 Ford Mustang 260/289 V8 models with drum brakes.
Q: Is this an AMK Products kit?
A: Yes. This Master Chassis Kit is manufactured by AMK Products.
Q: How many pieces are included?
A: This kit includes 337 pieces.
Q: What areas does this kit cover?
A: This kit covers many chassis-related areas, including suspension, steering, drum brake mounting hardware, rear axle hardware, driveshaft hardware, engine and transmission mounting hardware, fuel tank hardware, single exhaust hangers, parking brake hardware, power steering hardware, shock brackets, stabilizer bar hardware, and related underbody fasteners.
Q: Is this kit for 6-cylinder cars?
A: No. This kit is for 1965 Mustang 260/289 V8 drum brake applications.
Q: Is this kit for disc brake cars?
A: No. This kit is for drum brake applications.
Q: Is this good for concours restorations?
A: Yes. This kit is a strong choice for restorers who want OEM-correct fasteners and factory-style chassis detail.
Q: Where does this ship from?
A: Ships from Winchester, VA.

Manufactured by AMK Products.
Ships from Winchester, VA.
We won’t screw you, but our fasteners will.™