1965 Mustang Master Chassis Kit 6 Cylinder Drum Brake

1965 Mustang Master Chassis Kit 6 Cylinder Drum Brake | AMK 65Z-DRSX
Restore your 1965 Ford Mustang 6-cylinder drum brake chassis with this Master Chassis Kit from AMK Products. This kit includes OEM-correct fasteners for suspension, steering, drum brakes, rear axle, drivetrain mounting, fuel tank, exhaust hangers, parking brake hardware, and related chassis components.
Each fastener is selected for proper fit, finish, head marking, and factory-style appearance. This 318-piece kit is ideal for restorers replacing missing, rusty, incorrect, or mismatched chassis hardware while maintaining correct factory detail.

PRODUCT DETAILS
Application: 1965 Ford Mustang
Engine: 6 Cylinder
Brake Type: Drum Brake
Kit Type: Master Chassis Kit
Manufacturer: AMK Products
Fastener Style: OEM-correct chassis restoration hardware
Quantity: 318 pieces
SKU: 65Z-DRSX

WHAT’S INCLUDED
65Z-DRSX - MASTER CHASSIS KIT, 1965 MUSTANG DRUM BRAKE 6 CYLINDER | Contains the sub-kits listed below | Qty 318
F-1457 - ACCELERATOR BELLCRANK TO FIREWALL - 6 CYLINDER | HXWA A screws | Qty 4
F-1441 - AXLE HOUSING TO SPRINGS | 5.0 inch U-bolts, flange nuts | Qty 12
F-1523 - AXLE RETAINER PLATES - 6 CYLINDER, EXCEPT 250 | Small head T-bolts, cad lock nuts | Qty 16
F-1616 - FRONT DRUM BRAKE ASSEMBLY TO SPINDLE | T-bolts, lock nuts | Qty 16
F-573 - BRAKE CABLES TO BODY | HXWA AB screws, retainers, nut | Qty 12
F-579 - BRAKE DRUM RETAINERS | Green push-on retainers | Qty 6
F-1150 - FRONT BRAKE HOSE BRACKETS TO BODY | Hex head C screws | Qty 2
F-576 - BRAKE HOSES TO BRACKET | U-clips | Qty 3
F-669 - BRAKE PLATE ADJUST HOLE PLUGS | Rubber plugs | Qty 2
F-594 - COIL SPRING SEATS - NUTS ONLY | 3/8-24 Marsden nuts | Qty 4
F-1111 - LOWER CONTROL ARMS | Hex bolts, nuts, split washers | Qty 6
F-3658 - UPPER CONTROL ARMS | Grade 8 1/2-20 knurled bolts, flange nuts | Qty 8
F-1280 - FRONT TUBULAR CROSSMEMBER | Special hex countersunk bolts | Qty 2
F-598 - DIFFERENTIAL CARRIER TO HOUSING | Cad lock nuts, copper washers | Qty 20
F-1305 - DISTRIBUTION BLOCK TO APRON | Hex C screw | Qty 1
F-1465 - DRIVESHAFT - 6 CYLINDER, ALL 65-66, M/T 67-68 | 1/4 inch U-bolts, nuts, split washers | Qty 6
F-804 - ENGINE BODY BRACKETS - ALL | Pointed HXWA B bolts with RBW marking, flange nuts | Qty 12
F-1447 - ENGINE INSULATOR - 6 CYLINDER | Hex split SEMS, lock nuts, flat washers | Qty 8
F-1245 - SINGLE EXHAUST HANGERS | Hex C screws | Qty 6
F-225 - GAS TANK | HXWA A screws | Qty 11
F-412 - GAS TANK FILLER NECK WITH TWIST CAP | HXWA B screws | Qty 5
F-571 - CHASSIS GREASE PLUGS | Hex plugs | Qty 9
F-351 - IDLER ARM | Hex bolts with F marking, lock nuts, clipped washers | Qty 6
F-1064 - LEAF SPRING MOUNTING AT FRONT | Pointed hex bolts, flange nuts, washers | Qty 6
F-1431 - MASTER CYLINDER WITHOUT POWER BRAKES | Hex split SEMS | Qty 2
F-800 - PARKING BRAKE CONTROL TO BODY | Phillips pan external SEMS, caged and lock nuts | Qty 8
F-613 - PITMAN ARM TO GEAR BOX WITH 1.0 SHAFT | 1 1/8 AF hex jam nut, split washer | Qty 2
F-664 - REAR SHACKLE ASSEMBLY - NUTS ONLY | Marsden nuts | Qty 4
F-311 - FRONT SHOCK BRACKETS | Low-head carriage bolts, external KEPS nuts | Qty 12
F-343 - FRONT SHOCKS | External hex SEMS with SEMS marking, lock nuts, washers | Qty 12
F-1443 - FRONT STABILIZER BAR BRACKETS | Hex bolts, lock nuts | Qty 8
F-3951 - FRONT STABILIZER BAR END LINKS | Bolts, retainers, bushings, spacers, nuts | Qty 22
F-347 - STEERING GEAR BOX | Hex bolts, clipped flat washers, split washers | Qty 9
F-1303 - STEERING LINKAGE - 6 CYLINDER WITH POWER STEERING | Slotted nuts, cotter pins | Qty 24
F-1464 - STRUT ROD THREADED ENDS TO BODY | 9/16-18 lock nuts | Qty 2
F-1156 - STRUT RODS TO LOWER CONTROL ARM | Hex bolts, lock nuts | Qty 8
F-2946 - FRONT SUSPENSION BUMPERS | External KEPS nuts | Qty 2
F-1467 - TRANSMISSION CROSSMEMBER | Pointed flange bolts, lock nuts, washers | Qty 5
F-1157 - TRANSMISSION INSULATOR - 6 CYLINDER | Hex bolts, hex split SEMS, nuts, washers | Qty 10
F-1772 - WHEEL CYLINDERS - 170/200 | 1/4-20 hex external SEMS | Qty 8

VEHICLE FITMENT
1965 Ford Mustang
Fits 6-cylinder drum brake applications.

COMMON USES
1965 Mustang chassis fastener replacement
6-cylinder Mustang suspension and steering restoration
Drum brake chassis hardware replacement
Brake assembly, brake hose, master cylinder, parking brake, and brake cable hardware replacement
Rear axle, leaf spring, control arm, shock, stabilizer bar, and steering gear hardware restoration
Fuel tank, single exhaust hanger, transmission crossmember, transmission insulator, and engine mount hardware replacement
Concours-quality and driver-quality Mustang restoration projects
Replacing missing, rusty, incorrect, or mismatched chassis fasteners

FAQ
Q: What does this master chassis kit fit?
A: This kit is designed for 1965 Ford Mustang 6-cylinder models with drum brakes.
Q: Is this an AMK Products kit?
A: Yes. This Master Chassis Kit is manufactured by AMK Products.
Q: How many pieces are included?
A: This kit includes 318 pieces.
Q: What areas does this kit cover?
A: This kit covers many chassis-related areas, including suspension, steering, drum brake mounting hardware, rear axle hardware, driveshaft hardware, engine and transmission mounting hardware, fuel tank hardware, exhaust hangers, parking brake hardware, shock brackets, stabilizer bar hardware, and related underbody fasteners.
Q: Is this kit for V8 cars?
A: No. This kit is for 1965 Mustang 6-cylinder drum brake applications.
Q: Is this kit for disc brake cars?
A: No. This kit is for drum brake applications.
Q: Is this good for concours restorations?
A: Yes. This kit is a strong choice for restorers who want OEM-correct fasteners and factory-style chassis detail.
Q: Where does this ship from?
A: Ships from Winchester, VA.

Manufactured by AMK Products.
Ships from Winchester, VA.
We won’t screw you, but our fasteners will.™