1966-1967 Ford 289 Master Engine Bolt Kit Iron Water Pump

1966-1967 Ford 289 Master Engine Bolt Kit w/o AC Iron WP | AMK 66O-SBS
DESCRIPTION

Restore your 1966-1967 Ford 289 engine hardware with this Master Engine Kit from AMK Products.

This kit is designed for 1966-1967 289 engines without air conditioning and with a cast iron water pump.

This 122-piece kit includes OEM-correct fasteners for the air cleaner, air cleaner heat shroud, carburetor, crank pulley, crankshaft damper, distributor, engine block drain plugs, engine fan, exhaust manifolds, fuel pump, ignition coil bracket, intake manifold, oil pan, starter, engine ID tag, timing cover, valve covers, water neck, cast iron water pump, and related engine components.

Each fastener is selected for proper fit, finish, head marking, and factory-style appearance.

This kit is ideal for restorers replacing missing, rusty, incorrect, or mismatched engine hardware while maintaining correct factory detail.
 
PRODUCT DETAILS

Application: 1966-1967 Ford

Engine: 289

Water Pump: Cast Iron Water Pump

A/C Application: Without A/C

Kit Type: Master Engine Kit

Manufacturer: AMK Products

Fastener Style: OEM-correct engine restoration hardware

Quantity: 122 pieces

SKU: 66O-SBS
 
WHAT’S INCLUDED

66O-SBS - MASTER ENGINE KIT, 1966-1967 289 WITHOUT A/C WITH IRON WP | Contains the sub-kits listed below | Qty 122

F-375 - AIR CLEANER - ALL V8 | Stamped wing nut only | Qty 1

F-547 - AIR CLEANER HEAT SHROUD - 260/289 | Hex clear stud, nut, flat washer | Qty 3

F-1125 - CARBURETOR - 1.0 INCH SPACER | Studs, 7/16 AF nuts | Qty 8

F-509 - CRANK PULLEY - ALL | Place bolts | Qty 3

F-1191 - CRANKSHAFT DAMPER - V8 | Hex bolt, flat washer | Qty 2

F-458 - DISTRIBUTOR - 6 CYL & ALL V8 | Hex split SEMS | Qty 1

F-645 - DISTRIBUTOR POINTS & CONDENSER - SINGLE | Slotted pan C screws | Qty 3

F-751 - DISTRIBUTOR VACUUM UNIT | Slotted pan screws | Qty 2

F-1389 - ENGINE BLOCK DRAIN PLUGS | External hex pipe plug | Qty 2

F-1654 - ENGINE FAN - 3.15 OR 3.22 INCH SPACER, 289 | 3 3/4 inch hex bolts, split washers, zinc | Qty 8

F-527 - EXHAUST MANIFOLDS - 289 | Special Ramplok hex conical SEMS | Qty 16

F-519 - FUEL PUMP - V8 EXCEPT 351C | Hex split SEMS | Qty 2

F-420 - IGNITION COIL STRAP & BRACKET - ALL V8 | Hex split SEMS, HXWA screw, hex nut | Qty 3

F-478 - INTAKE MANIFOLD - 260/289 | Hex flat SEMS with sealing washers | Qty 12

F-484 - OIL PAN - 260/289/302/351W | Hex conical SEMS | Qty 22

F-1409 - STARTER - 260/289/302/351 | HXWA split SEMS, silver zinc | Qty 2

F-569 - ENGINE ID TAG - 260/289/302 | Hex bolt | Qty 1

F-489 - TIMING COVER - 260/289 WITH ALT | Hex flange bolts, 5 short and 1 long | Qty 6

F-481 - VALVE COVERS, STEEL - 289/302/351W | Hex conical SEMS | Qty 12

F-506 - WATER NECK - 260/289/351W | Hex split SEMS | Qty 2

F-304 - WATER PUMP, CAST IRON - 289/302 WITHOUT A/C | Hex flange and place bolts, hex split SEMS | Qty 11
 
VEHICLE FITMENT

1966 Ford applications with 289 V8 engine

1967 Ford applications with 289 V8 engine

Fits cast iron water pump applications without air conditioning.
 
COMMON USES

1966-1967 289 engine fastener replacement

289 V8 engine rebuild hardware replacement

Cast iron water pump, non-A/C engine hardware restoration

Air cleaner, carburetor, distributor, exhaust manifold, fuel pump, intake manifold, oil pan, starter, timing cover, valve cover, water neck, and water pump hardware replacement

Concours-quality and driver-quality Ford restoration projects

Replacing missing, rusty, incorrect, or mismatched engine fasteners
 
FAQ

Q: What does this master engine kit fit?

A: This kit is designed for 1966-1967 Ford 289 V8 applications without air conditioning and with a cast iron water pump.
 
Q: Is this an AMK Products kit?

A: Yes. This Master Engine Kit is manufactured by AMK Products.
 
Q: How many pieces are included?

A: This kit includes 122 pieces.
 
Q: Is this for A/C cars?

A: No. This kit is for non-A/C applications.
 
Q: Is this for cast iron water pump applications?

A: Yes. This kit includes hardware for cast iron water pump applications.
 
Q: Is this good for concours restorations?

A: Yes. This kit is a strong choice for restorers who want OEM-correct fasteners, correct finishes, and factory-style engine detail.
 
Q: Where does this ship from?

A: Ships from Winchester, VA.
 
Manufactured by AMK Products.

Ships from Winchester, VA.

We won’t screw you, but our fasteners will.™