1967 Chevelle Convertible Interior Screw Master Kit | All Interiors

1967 Chevelle Convertible Interior Screw Master Kit | All Interiors
 
Restore your 1967 Chevelle Convertible interior with this OEM-correct Interior Screw Master Kit for all interior trim levels. This complete master kit includes factory-style screws, clips, retainers, bumpers, nuts, washers, and specialty interior hardware used throughout the dash, console, doors, seats, trim, steering column, quarter trim areas, weatherstrip areas, and other key interior components.
Designed specifically for 1967 Chevelle Convertible models, this kit helps replace worn, missing, rusted, or incorrect hardware with the proper restoration-style fasteners for a more accurate fit and appearance. Ideal for full restorations, interior rebuilds, and factory-style detail work.
Manufactured by AMK Products.
Ships from Winchester, VA.
 
Each sub-kit below includes the correct screws, retainers, nuts, and hardware used in 1967 Chevelle Convertible interiors:
G-6673 – Armrest Pad & Base (Front Doors) — PH Flat B & PH Round A Screws
G-5473 – Ash Tray Retainer — PH PN B Screws
G-6568 – Console to Floor — PH PN & PH Truss Screws, SPR Nuts
G-6586 – Console Door Bumpers — Rubber Bumpers
G-5655 – Console Lamp Lens — Chrome PH OV Screws
G-5651 – Console Top Panels, Door & Latch — Screws, Stamped Nuts
G-5636 – Courtesy Lamps, Underdash — PH PN Flat WA SEMS
G-5608 – Dash Pad — PH OV Screws, CONI SEMS, NYL Nuts
G-4989 – Dimmer Switch — HXWA AB Screws
G-5409 – Inside Door Handles (Standard) — Wire Retainers
G-7559 – Door Jamb Wedges (Convertible) — PH Flat AB Screws
G-6667 – Door Panels — Clips, Plugs, PH OV AB SEMS
G-7508 – Filler Panel Behind Rear Seat (Convertible) — Chrome PH RNDWA AB Screws
G-4986 – Fuse Panel to Firewall — #10 × 2¼ HXWA AB Screws with Sealer
G-6585 – Glove Box Bumpers — Rubber Bumpers
G-5614 – Glove Box Door & Liner — PH RNDWA AB Screws, CONI KEPS Nuts
G-5613 – Glove Box Striker — PH PN AB EXT SEMS
G-5605 – Heater Control to Dash — PH PN AB Screws
G-5478 – Heater/AC Outlet (LH Underdash) — HXWA AB Screws
G-5612 – Instrument Panel Trim Plates (Malibu) — PH PN BT Screws, Stamped Nuts
G-5611 – Instrument Panel Trim Plates (Exc. Malibu) — PH PN BT Screws
G-5635 – Instrument Bezel to Dash — HXWA AB Screws, Spring Nuts
G-6136 – Firewall Insulation — Rubber Retainers
G-6652 – Kick Panels (w/o AC) — HXWA Screws
G-4621 – Inside Mirror Bracket — Chrome Slot Oval Shoulder Screw, Bushing
G-7507 – Convertible Header Moulding — SS/Chrome PH OV AB Screws
G-6668 – Door & Quarter Trim Panel Top Mouldings — PH Flat AB Screws
G-7506 – Convertible Quarter Trim Panels — PH OV .50 SEMS, PH PN & PH RNDWA Screws
G-4821 – Radio Control Shafts & Knobs — Special Thin HX Nuts, Spring Washers
G-4321 – Scuff Plates at Door Opening — SS/Chrome PH OV AB Screws
G-6657 – Front Seat Back Stop Bumpers — PH PN AB Screws
G-5398 – Front Seat Back Strikers (A-Body Bench) — Trim HX .62 CONI SEMS with Pilot
G-5380 – Rear Seat Back to Floor — HX AB CONI Tooth SEMS
G-6660 – Seat Back Panels — PH PNWA Flat Top Screws
G-6161 – Seat Back Pivots — Retaining Clips
G-7513 – Seat Back Release Bezels (Bench Only) — Chrome PH OV AB Screws
G-6658 – Seat Back Release Escutcheons — Chrome PH OV & PN AB Screws
G-7514 – Seat Belt Bezels (Bench Only) — PH RNDWA AB Screws
G-5654 – Seat Belt Buckle Retainers — Chrome PH OV Screws, FL SPR Nuts
G-6955 – Seat Pivot Covers — Split Dart Metal Retainers
G-6661 – Seat Side Panels — Chrome PH OV AB Screws
G-6653 – Seat Tracks to Floor — HX CONI Tooth SEMS, Peri KEPS
G-5629 – Steering Column to Dash — HX PP SEMS, HX Bolts, Nuts, Washers
G-5924 – Steering Column Cover to Firewall — Plastic Retainers
G-5630 – Steering Column Seal Retainer — HXWA AB Screws
G-7517 – Sun Visor & Mirror Brackets (Convertible) — Chrome PH OV MS Screws, PH RNDWA AB Screws
G-5378 – Sun Visor Clamps — Chrome Slot Fill Screws
G-4991 – Turn Signal Lever — PH PN T Screw
G-6666 – Vent Window Channel to Door — #10 × 2½ SS/Chrome PH OV Screws
G-6677 – Quarter Glass “U” Weatherstrip — PH Flat AB Screws
G-7512 – Windlace End Caps at Quarter — Chrome RNDWA AB Screws
G-5400 – Window Crank Handles — Retaining Clips
SKU: 67AN-CV
 
Vehicle Fitment
1967 Chevelle Convertible – All Interiors
 
Common Uses
Full interior restoration
Interior trim, panels, and console reassembly
Convertible-specific interior hardware replacement
OEM-correct interior fastener restoration
 
FAQ 
What is included in the 1967 Chevelle Convertible Interior Screw Master Kit?
This kit includes OEM-correct screws, clips, retainers, bumpers, nuts, washers, and specialty interior fasteners used throughout the interior of 1967 Chevelle Convertible models.
Is this kit correct for 1967 Chevelle Convertible models?
Yes. This master kit is specifically designed for 1967 Chevelle Convertible applications and includes convertible-specific interior hardware used in key restoration areas.
Is this a good kit for a full interior restoration?
Yes. This kit is ideal for full interior restoration, trim reassembly, console installation, and correcting missing or incorrect interior hardware.
Are these OEM-correct fasteners?
Yes. This kit is built with OEM-correct style interior fasteners to help maintain a factory-style appearance and proper fit during restoration.
We won’t screw you, but our fasteners will.™