1967 Mustang Master Chassis Kit 289/289HP Disc Brake

1967 Mustang Master Chassis Kit 289/289HP Disc Brake | AMK 67Z-DCSB
Restore your 1967 Ford Mustang 289 or 289 High Performance disc brake chassis with this Master Chassis Kit from AMK Products. This kit includes OEM-correct fasteners for suspension, steering, disc brakes, rear axle, drivetrain mounting, fuel tank, dual exhaust hangers, brake booster hardware, power steering components, and related chassis hardware.
Each fastener is selected for proper fit, finish, head marking, and factory-style appearance. This 366-piece kit is ideal for restorers replacing missing, rusty, incorrect, or mismatched chassis hardware while maintaining correct factory detail.

PRODUCT DETAILS
Application: 1967 Ford Mustang
Engine: 289 / 289HP V8
Brake Type: Disc Brake
Kit Type: Master Chassis Kit
Manufacturer: AMK Products
Fastener Style: OEM-correct chassis restoration hardware
Quantity: 366 pieces
SKU: 67Z-DCSB

WHAT’S INCLUDED
67Z-DCSB - MASTER CHASSIS KIT, 1967 MUSTANG DISC BRAKE 289/289HP | Contains the sub-kits listed below | Qty 366
F-1458 - ACCELERATOR BELLCRANK TO FIREWALL - 8 CYLINDER | HXWA A screws | Qty 3
F-1403 - AXLE HOUSING TO SPRINGS | 5 1/2 inch U-bolts, flange nuts | Qty 12
F-1439 - AXLE RETAINER PLATES - 8 CYLINDER | T-bolts, cad lock nuts | Qty 16
F-1478 - BRAKE BOOSTER TO FIREWALL | Hex split SEMS, flange nuts | Qty 5
F-574 - BRAKE CABLES TO BODY | Retainers, HXWA screws, nut, washers | Qty 10
F-1471 - BRAKE CALIPER BRACKETS TO SPINDLE | Grade 8 HXWA bolts, lock nuts | Qty 16
F-2916 - BRAKE CALIPERS TO BRACKET | Drilled Grade 8 bolts | Qty 4
F-579 - BRAKE DRUM RETAINERS | Green push-on retainers | Qty 6
F-1150 - FRONT BRAKE HOSE BRACKETS TO BODY | Hex head C screws | Qty 2
F-576 - BRAKE HOSES TO BRACKET | U-clips | Qty 3
F-670 - BRAKE LIGHT SWITCH | Retaining pin | Qty 1
F-1823 - BRAKE LIGHT SWITCH | Retaining pin | Qty 1
F-669 - BRAKE PLATE ADJUST HOLE PLUGS | Rubber plugs | Qty 2
F-595 - COIL SPRING SEATS / PERCHES | Hug-Lok nuts | Qty 4
F-3913 - LOWER CONTROL ARMS | Grade 8 cam bolts, nuts, washers | Qty 8
F-2490 - UPPER CONTROL ARMS | Grade 8 knurled bolts, nuts, split washers | Qty 12
F-1280 - FRONT TUBULAR CROSSMEMBER | Special hex countersunk bolts | Qty 2
F-598 - DIFFERENTIAL CARRIER TO HOUSING | Cad lock nuts, copper washers | Qty 20
F-1273 - DRIVESHAFT - V8, 6 CYL 67-68 A/T, ALL 69 AND UP | 5/16 inch U-bolts, lock nuts | Qty 6
F-178 - ENGINE BODY BRACKETS - V8 | Flange bolts and nuts | Qty 12
F-753 - ENGINE INSULATOR TO BODY BRACKETS - V8 | 4 3/4 inch bolts, flange nuts, flat washers | Qty 6
F-183 - ENGINE INSULATOR TO BLOCK - 289 | Hex bolts, split washers | Qty 8
F-1452 - DUAL EXHAUST HANGERS | Carriage bolts, hex and HXWA screws, nuts | Qty 20
F-411 - GAS CAP - POP OPEN | Phillips flat A screws only | Qty 4
F-225 - GAS TANK | HXWA A screws | Qty 11
F-412 - GAS TANK FILLER NECK WITH TWIST CAP | HXWA B screws | Qty 5
F-571 - CHASSIS GREASE PLUGS | Hex plugs | Qty 9
F-351 - IDLER ARM | Hex bolts with F marking, lock nuts, clipped washers | Qty 6
F-1065 - LEAF SPRING MOUNTING AT FRONT | Pointed hex bolts, flange nuts, washers | Qty 6
F-1474 - MASTER CYLINDER WITH POWER BRAKES | Hex nuts, split washers | Qty 4
F-508 - POWER STEERING CYLINDER BRACKET TO BODY | Hex bolts with F marking, lock nuts, washers | Qty 7
F-675 - POWER STEERING HOSE SUPPORT INSULATOR RETAINER | HXWA F screws | Qty 2
F-1326 - PARKING BRAKE CONTROL TO BODY | Pozi pan external SEMS, caged and flange nuts | Qty 6
F-613 - PITMAN ARM TO GEAR BOX WITH 1.0 SHAFT | 1 1/8 AF hex jam nut, split washer | Qty 2
F-1214 - PROPORTIONING VALVE TO APRON | 5/16-18 HXWA F screw | Qty 1
F-665 - REAR SHACKLE ASSEMBLY - NUTS ONLY | Lock nuts | Qty 4
F-312 - FRONT SHOCK BRACKETS | Low-head carriage bolts, flange nuts | Qty 12
F-344 - FRONT SHOCKS | Hex external SEMS with Anchor marking, nuts, washers | Qty 12
F-1204 - FRONT STABILIZER BAR BRACKETS | Hex bolts, lock nuts | Qty 8
F-3951 - FRONT STABILIZER BAR END LINKS | Bolts, retainers, bushings, spacers, nuts | Qty 22
F-3934 - STEERING COUPLING WITHOUT TILT | 12-point bolt, lock nuts | Qty 3
F-349 - STEERING GEAR BOX | Hex bolts, clipped flat washers, split washers | Qty 9
F-317 - STEERING LINKAGE WITH POWER STEERING | Slotted nuts, cotter pins, flat washers | Qty 23
F-659 - STRUT ROD THREADED ENDS TO BODY | Lock nuts | Qty 4
F-1463 - STRUT RODS TO LOWER CONTROL ARM | 7/16-20 knurled bolts, lock nuts | Qty 8
F-2964 - REAR SUSPENSION BUMPER - 289HP, 390, 67-68 GT | Lock nut | Qty 1
F-2961 - FRONT SUSPENSION BUMPERS | Hug-Lok nuts | Qty 2
F-177 - TRANSMISSION CROSSMEMBER | HXWA bolts, lock nuts, flat washers | Qty 5
F-356 - WHEEL CYLINDERS - 250 AND ALL 8 CYLINDER | 5/16-18 hex external SEMS | Qty 4

VEHICLE FITMENT
1967 Ford Mustang
Fits 289 and 289 High Performance V8 disc brake applications.

COMMON USES
1967 Mustang chassis fastener replacement
289 and 289HP V8 Mustang suspension and steering restoration
Disc brake chassis hardware replacement
Brake caliper bracket, brake caliper, brake hose, brake booster, proportioning valve, parking brake, and brake cable hardware replacement
Rear axle, leaf spring, control arm, shock, stabilizer bar, and steering gear hardware restoration
Power steering cylinder bracket and steering linkage hardware replacement
Fuel tank, dual exhaust hanger, transmission crossmember, and engine mount hardware replacement
Concours-quality and driver-quality Mustang restoration projects
Replacing missing, rusty, incorrect, or mismatched chassis fasteners

FAQ
Q: What does this master chassis kit fit?
A: This kit is designed for 1967 Ford Mustang 289 and 289 High Performance V8 models with disc brakes.
Q: Is this an AMK Products kit?
A: Yes. This Master Chassis Kit is manufactured by AMK Products.
Q: How many pieces are included?
A: This kit includes 366 pieces.
Q: What areas does this kit cover?
A: This kit covers many chassis-related areas, including suspension, steering, disc brake mounting hardware, brake booster hardware, rear axle hardware, driveshaft hardware, engine and transmission mounting hardware, fuel tank hardware, dual exhaust hangers, parking brake hardware, power steering hardware, shock brackets, stabilizer bar hardware, and related underbody fasteners.
Q: Is this kit for 6-cylinder cars?
A: No. This kit is for 1967 Mustang 289/289HP V8 disc brake applications.
Q: Is this kit for drum brake cars?
A: No. This kit is for disc brake applications.
Q: Is this good for concours restorations?
A: Yes. This kit is a strong choice for restorers who want OEM-correct fasteners and factory-style chassis detail.
Q: Where does this ship from?
A: Ships from Winchester, VA.

Manufactured by AMK Products.
Ships from Winchester, VA.
We won’t screw you, but our fasteners will.™