1967 Shelby Master Chassis Bolt Kit 390 428 Disc Brakes
1967 Shelby Master Chassis Bolt Kit 390/428 Disc Brakes | AMK 67Z-DCBB
DESCRIPTION
Restore your 1967 Shelby 390 or 428 disc brake chassis hardware with this Master Chassis OEM Correct Bolt Kit from AMK Products.
This 374-piece kit includes OEM-correct fasteners for suspension, steering, disc brakes, rear axle, drivetrain mounting, gas tank, parking brake, stabilizer bar, shocks, transmission crossmember, wheel cylinders, and related chassis components.
Each fastener is selected for proper fit, finish, head marking, and factory-style appearance.
This kit is ideal for concours-level Shelby restorations, high-quality driver restorations, and replacing missing, rusty, incorrect, or mismatched chassis hardware.
PRODUCT DETAILS
Application: 1967 Shelby
Engine: 390 / 428
Brake Type: Disc Brakes
Kit Type: Master Chassis OEM Correct Bolt Kit
Manufacturer: AMK Products
Fastener Style: OEM-correct chassis restoration hardware
Quantity: 374 pieces
SKU: 67Z-DCBB
WHAT’S INCLUDED
67Z-DCBB - SHELBY MASTER CHASSIS OEM CORRECT BOLT KIT, 1967 SHELBY 390/428 DISC BRAKES | Qty 374
F-747 - ACCEL BELLCRANK TO FIREWALL | HXWA AB screws
F-1404 - AXLE HOUSING TO SPRINGS | 5 1/2 inch U-bolts, flange nuts
F-1440 - AXLE RETAINER PLATES - 250 & 8 CYL | T-bolts, red lock nuts
F-1480 - BRAKE BOOSTER TO FIREWALL | Hex split SEMS, flange nuts
F-575 - BRAKE CABLES TO BODY | Retaining clips, hex nuts
F-1263 - BRAKE CALIPERS TO SPINDLE | Drilled Grade 8 bolts, split washers
F-579 - BRAKE DRUM RETAINERS | Green push-on retainers
F-1250 - DISC BRAKE HOSES TO BODY | HXWA C screws, U-clip
F-670 - BRAKE LIGHT SWITCH | Retaining pin
F-1601 - BRAKE ROTOR SHIELDS | Hex external SEMS
F-596 - COIL SPRING SEATS / PERCHES | Lock nuts
F-1515 - LOWER CONTROL ARMS | Grade 8 cam bolts, red nuts, washers
F-3311 - UPPER CONTROL ARMS | Grade 8 1/2-13 knurled bolts, red nuts
F-1280 - FRONT TUBULAR CROSSMEMBER | Special hex countersunk bolts
F-785 - DIFFERENTIAL CARRIER TO HOUSING | Red lock nuts, copper washers
F-1273 - DRIVESHAFT | 5/16 inch U-bolts, lock nuts
F-179 - V8 ENGINE BODY BRACKETS | UBS flange bolts and nuts
F-187 - ENGINE INSULATOR & BLOCK BRACKETS - 390/428/429 | Special flange bolts, lock nuts
F-753 - ENGINE INSULATOR TO BODY BRACKETS - V8 | 4 3/4 inch bolts, flange nuts, flat washers
F-1454 - DUAL EXHAUST HANGERS - TRANSVERSE MUFFLER | Carriage bolts, HXWA screws, flange nuts
F-411 - POP-OPEN GAS CAP | Phillips flat A screws only
F-357 - GAS TANK | HXWA AB screws
F-413 - GAS TANK FILLER NECK WITH TWIST CAP | HXWA B screws
F-571 - GREASE PLUGS, CHASSIS | Hex plugs
F-1265 - IDLER ARM | Hex bolts, lock nuts, clipped washers
F-251 - LEAF SPRING MOUNTING AT FRONT | Flange bolts and nuts
F-1475 - MASTER CYLINDER WITH POWER BRAKES | Flange nuts
F-1362 - POWER STEERING CYLINDER BRACKET TO BODY | Hex bolts, lock nuts, washers
F-676 - POWER STEERING HOSE SUPPORT INSULATOR RETAINER | HXWA screws
F-1333 - PARKING BRAKE CONTROL TO BODY | HXWA serrated screws
F-614 - PITMAN ARM TO GEAR BOX | Hex jam nut, split washer
F-798 - PROPORTIONING VALVE TO APRON | Flange nuts
F-665 - REAR SHACKLE ASSEMBLY - NUTS ONLY | Lock nuts
F-313 - FRONT SHOCK BRACKETS | Low head carriage bolts, flange nuts
F-345 - FRONT SHOCKS | Hex external SEMS marked Anchor, 5/16-18 nuts, washers
F-662 - FRONT STABILIZER BAR BRACKETS | UBS flange bolts and flange nuts
F-3950 - FRONT STABILIZER BAR END LINKS | Bolts, retainers, bushings, spacers, nuts
F-612 - STEERING COUPLING 11/4/68 AND LATER | 12-point bolt, 5/16-18 lock nuts
F-350 - STEERING GEAR BOX | Hex bolts, clipped flat washers, split washers
F-814 - STEERING LINKAGE WITH POWER STEERING | Slotted nuts, cotter pins, flat washers
F-660 - STRUT ROD THREADED ENDS TO BODY | Lock nuts, slotted nuts, pins
F-1264 - STRUT RODS TO LOWER CONTROL ARM | 1/2-13 special knurled bolts, nuts, pins
F-2957 - REAR SUSPENSION BUMPER | Lock nut
F-2960 - FRONT SUSPENSION BUMPERS | 5/16-18 lock nuts
F-1203 - TRANSMISSION CROSSMEMBER | Flange bolts, lock nuts, flat washers
F-356 - WHEEL CYLINDERS - 2, 250 & ALL 8 CYL | 5/16-18 hex external SEMS
VEHICLE FITMENT
1967 Shelby
Fits 390 / 428 disc brake applications.
COMMON USES
1967 Shelby chassis fastener replacement
390 / 428 disc brake chassis hardware replacement
Brake booster, brake caliper, brake hose, brake rotor shield, master cylinder, proportioning valve, and wheel cylinder hardware replacement
Rear axle, differential carrier, driveshaft, leaf spring, shackle, shock, stabilizer bar, and suspension hardware restoration
Steering gear box, steering linkage, pitman arm, idler arm, steering coupling, and strut rod hardware replacement
Engine mount, transmission crossmember, gas tank, and filler neck hardware replacement
Concours-quality and driver-quality Shelby restoration projects
Replacing missing, rusty, incorrect, or mismatched chassis fasteners
FAQ
Q: What does this master chassis bolt kit fit?
A: This kit is designed for 1967 Shelby models with 390 or 428 engines and disc brakes.
Q: Is this an AMK Products kit?
A: Yes. This Master Chassis OEM Correct Bolt Kit is manufactured by AMK Products.
Q: How many pieces are included?
A: This kit includes 374 pieces.
Q: What type of brakes is this kit for?
A: This kit is for disc brake applications.
Q: Is this good for concours restorations?
A: Yes. This kit is a strong choice for restorers who want OEM-correct fasteners, correct finishes, and factory-style chassis detail.
Q: Where does this ship from?
A: Ships from Winchester, VA.
Manufactured by AMK Products.
Ships from Winchester, VA.
We won’t screw you, but our fasteners will.™