1968 Shelby GT350 302HP Master Engine Bolt Kit Without AC

1968 Shelby GT350 302HP Master Engine Bolt Kit w/o AC | AMK 68M-GT350S
 
DESCRIPTION
Restore your 1968 Shelby GT350 302HP engine hardware with this Master Engine Bolt Kit from AMK Products.
 
This kit is designed for concours-level Shelby GT350 restorations using the 302 small-block engine without air conditioning.
 
This OEM-correct kit includes fasteners for the air cleaner, air cleaner heat shroud, air cleaner snorkel, carburetor, crank pulley, crankshaft damper, distributor, distributor points and condenser, distributor vacuum unit, engine block drain plugs, engine fan, fan clutch, engine lift hooks, exhaust manifolds, fuel pump, ignition coil bracket, intake manifold, oil pan, starter, engine ID tag, timing cover, valve covers, water neck, water pump, and related engine components.
 
Each fastener is selected for proper fit, finish, head marking, thread pattern, and factory-style appearance.
 
This kit is ideal for 1968 Shelby GT350 concours restorations, high-quality driver restorations, and replacing missing, rusty, incorrect, or mismatched engine hardware.
 
PRODUCT DETAILS
Application: 1968 Shelby GT350
Engine: 302HP / 302 Small Block
A/C Application: Without A/C
Kit Type: Master Engine Bolt Kit
Manufacturer: AMK Products
Fastener Style: OEM-correct engine restoration hardware
 
SKU: 68M-GT350S
 
WHAT’S INCLUDED
68M-GT350S - MASTER ENGINE BOLT KIT, 1968 SHELBY GT350 302HP WITHOUT A/C
F-375 - AIR CLEANER - ALL V8
Stamped wing nut only
F-532 - AIR CLEANER HEAT SHROUD - 289/302
Hex clear stud, brass nuts, external washers
F-546 - AIR CLEANER SNORKEL
HXWA screws
F-1125 - CARBURETOR - 1.00 INCH SPACER
Studs, 7/16 AF nuts
F-510 - CRANK PULLEY - 3 BOLT
Place bolts
F-1191 - CRANKSHAFT DAMPER - V8
Hex bolt, flat washer
F-458 - DISTRIBUTOR - 6 CYL & ALL V8
Hex split SEMS
F-645 - DISTRIBUTOR POINTS & CONDENSER - SINGLE
Slotted pan C screws
F-619 - DISTRIBUTOR VACUUM UNIT
Slotted pan screws
F-1389 - ENGINE BLOCK DRAIN PLUGS
External hex pipe plug
F-1202 - ENGINE FAN TO CLUTCH
Hex split SEMS, phosphated
F-1800 - ENGINE FAN CLUTCH TO WATER PUMP
7/16 inch hex split SEMS, SEMS, phosphated
F-1617 - ENGINE LIFT HOOKS - 302/351W
Jam nuts
F-529 - EXHAUST MANIFOLDS - 289/302
Special Ramplok hardware, 4 with stud
F-519 - FUEL PUMP - V8 EXCEPT 351C
Hex split SEMS
F-376 - IGNITION COIL STRAP & BRACKET - V8 EXCEPT 351C
Hex split SEMS, HXWA screw, hex nut
F-479 - INTAKE MANIFOLD - 289/302
Place bolts, studs, flange nuts
F-484 - OIL PAN - 260/289/302/351W
Hex conical SEMS
F-1410 - STARTER - 289/302/351
HXWA split SEMS, yellow zinc
F-569 - ENGINE ID TAG - 260/289/302
Hex bolt
F-490 - TIMING COVER - 289/302/351
Hex flange bolts, 4 short and 2 long
F-481 - VALVE COVERS, STEEL - 289/302/351W
Hex conical SEMS
F-506 - WATER NECK - 260/289/351W
Hex split SEMS
F-305 - WATER PUMP - 289/302 WITHOUT A/C
Hex flange, hex and place bolts, hex SEMS
 
VEHICLE FITMENT
1968 Shelby GT350
Fits 302HP / 302 small-block engine applications without air conditioning.
 
COMMON USES
1968 Shelby GT350 engine fastener replacement
302HP small-block engine rebuild hardware replacement
Non-A/C engine hardware restoration
Air cleaner, carburetor, distributor, exhaust manifold, fuel pump, intake manifold, oil pan, starter, timing cover, valve cover, water neck, and water pump hardware replacement
Concours-quality and driver-quality Shelby restoration projects
Replacing missing, rusty, incorrect, or mismatched engine fasteners
 
FAQ
Q: What does this master engine bolt kit fit?
A: This kit is designed for 1968 Shelby GT350 models with the 302HP engine without air conditioning.
 
Q: Is this an AMK Products kit?
A: Yes. This Master Engine Bolt Kit is manufactured by AMK Products.
 
Q: Is this for 302 engines?
A: Yes. This kit is for 1968 Shelby GT350 302HP engine applications.
 
Q: Is this for A/C cars?
A: No. This kit is for non-A/C applications.
 
Q: Is this OEM-correct hardware?
A: Yes. This kit is designed for OEM-correct engine restoration with proper-style fasteners and factory-style appearance.
 
Q: Is this good for concours restorations?
A: Yes. This kit is a strong choice for restorers who want OEM-correct fasteners, correct finishes, and factory-style Shelby engine detail.
 
Q: Where does this ship from?
A: Ships from Winchester, VA.
 
Manufactured by AMK Products.
Ships from Winchester, VA.
 
We won’t screw you, but our fasteners will.™