1969-1970 Shelby GT350 351 Windsor Master Engine Bolt Kit With AC

1969-1970 Shelby GT350 351 Windsor Master Engine Bolt Kit With AC | AMK 69M-GT350A
 
DESCRIPTION
Restore your 1969-1970 Shelby GT350 351 Windsor engine hardware with this Master Engine Bolt Kit from AMK Products.
 
This OEM-correct kit is designed for Shelby GT350 restorers who need proper fasteners, factory-style finishes, dimensions, thread specifications, and original-style head markings for a correct 351W engine restoration with air conditioning.
 
This kit includes hardware for the air cleaner, air cleaner heat shroud, air cleaner snorkel, carburetor, crank pulley, crankshaft damper, distributor, distributor points and condenser, distributor vacuum unit, engine block drain plugs, engine lift hooks, exhaust manifolds, fuel pump, ignition coil bracket, intake manifold, oil pan, starter, engine ID tag, timing cover, Shelby aluminum valve covers, water neck, water pump with A/C, and related engine components.
 
Each fastener is selected for proper fit, finish, head marking, and factory-style appearance.
This kit is ideal for concours-quality Shelby restorations, high-quality driver restorations, and replacing missing, rusty, incorrect, or mismatched engine fasteners.
 
PRODUCT DETAILS
Application: 1969-1970 Shelby GT350
Engine: 351 Windsor / 351W Small Block
A/C Application: With A/C
Kit Type: Master Engine Bolt Kit
Manufacturer: AMK Products
Fastener Style: OEM-correct engine restoration hardware
SKU: 69M-GT350A
 
WHAT’S INCLUDED
69M-GT350A - MASTER ENGINE BOLT KIT, 1969-1970 SHELBY GT350 351 WINDSOR WITH A/C
F-375 - AIR CLEANER - ALL V8 | Stamped wing nut only
F-550 - AIR CLEANER HEAT SHROUD - 351W | Hex nuts, external washers
F-546 - AIR CLEANER SNORKEL | HXWA screws
F-514 - CARBURETOR - 1/4 TO 3/8 INCH SPACER | Studs, 7/16 AF nuts
F-510 - CRANK PULLEY - 3 BOLT | Place bolts
F-1191 - CRANKSHAFT DAMPER - V8 | Hex bolt, flat washer
F-458 - DISTRIBUTOR - 6 CYL & ALL V8 | Hex split SEMS
F-645 - DISTRIBUTOR POINTS & CONDENSER - SINGLE | Slotted pan C screws
F-619 - DISTRIBUTOR VACUUM UNIT | Slotted pan screws
F-1389 - ENGINE BLOCK DRAIN PLUGS | External hex pipe plug
F-1617 - ENGINE LIFT HOOKS - 302/351W | Jam nuts
F-530 - EXHAUST MANIFOLDS - 351W | Special Ramplok hex conical SEMS
F-519 - FUEL PUMP - V8 EXCEPT 351C | Hex split SEMS
F-376 - IGNITION COIL STRAP & BRACKET - V8 EXCEPT 351C | Hex split SEMS, HXWA screw, hex nut
F-1131 - INTAKE MANIFOLD - 351W | Flange bolts
F-484 - OIL PAN - 260/289/302/351W | Hex conical SEMS
F-1410 - STARTER - 289/302/351 | HXWA split SEMS, yellow zinc
F-569 - ENGINE ID TAG - 260/289/302 | Hex bolt
F-490 - TIMING COVER - 289/302/351 | Hex flange bolts, 4 short and 2 long
F-1619 - VALVE COVERS, ALUMINUM SHELBY 302/351 | Hex bolts with no marks, flat washers, split washers
F-506 - WATER NECK - 260/289/351W | Hex split SEMS
F-308 - WATER PUMP - 302/351 WITH A/C | Hex flange, hex and place bolts, hex SEMS
VEHICLE FITMENT
1969 Shelby GT350 with 351 Windsor engine and air conditioning.
1970 Shelby GT350 with 351 Windsor engine and air conditioning.
 
COMMON USES
1969-1970 Shelby GT350 351W engine fastener replacement
351 Windsor small-block engine rebuild hardware replacement
A/C engine hardware restoration
Shelby aluminum valve cover hardware replacement
Air cleaner, carburetor, distributor, exhaust manifold, fuel pump, ignition coil bracket, intake manifold, oil pan, starter, timing cover, valve cover, water neck, and water pump hardware replacement
 
Concours-quality and driver-quality Shelby restoration projects
Replacing missing, rusty, incorrect, or mismatched engine fasteners
 
FAQ
Q: What does this master engine bolt kit fit?
A: This kit is designed for 1969-1970 Shelby GT350 applications with the 351 Windsor engine and air
conditioning.
 
Q: Is this an AMK Products kit?
A: Yes. This Master Engine Bolt Kit is manufactured by AMK Products.
 
Q: Is this for the 351 Windsor engine?
A: Yes. This kit is for 351W small-block Ford applications.
 
Q: Is this for A/C cars?
A: Yes. This kit is for Shelby GT350 applications with air conditioning.
 
Q: Is this OEM-correct hardware?
A: Yes. This kit is designed for OEM-correct engine restoration with proper-style fasteners and factory-style appearance.
 
Q: Does this include Shelby aluminum valve cover hardware?
A: Yes. This kit includes hardware for Shelby aluminum 302/351 valve covers.
 
Q: Where does this ship from?
A: Ships from Winchester, VA.
 
Manufactured by AMK Products.
 
Ships from Winchester, VA.
 
We won’t screw you, but our fasteners will.™