1969 Mustang Master Chassis Kit 200 Drum Brake

1969 Mustang Master Chassis Kit 200 Drum Brake | AMK 69Z-DRSS
Restore your 1969 Ford Mustang 200 6-cylinder drum brake chassis with this Master Chassis Kit from AMK Products. This kit includes OEM-correct fasteners for suspension, steering, drum brakes, rear axle, drivetrain mounting, fuel tank, exhaust hangers, brake booster hardware, and related chassis hardware.
Each fastener is selected for proper fit, finish, head marking, and factory-style appearance. This 341-piece kit is ideal for restorers replacing missing, rusty, incorrect, or mismatched chassis hardware while maintaining correct factory detail.

PRODUCT DETAILS
Application: 1969 Ford Mustang
Engine: 200 6-Cylinder
Brake Type: Drum Brake
Kit Type: Master Chassis Kit
Manufacturer: AMK Products
Fastener Style: OEM-correct chassis restoration hardware
Quantity: 341 pieces
SKU: 69Z-DRSS

WHAT’S INCLUDED
69Z-DRSS - MASTER CHASSIS KIT, 1969 MUSTANG DRUM BRAKE 200 | Contains the sub-kits listed below | Qty 341
F-747 - ACCELERATOR BELLCRANK TO FIREWALL | HXWA AB screws | Qty 3
F-1404 - AXLE HOUSING TO SPRINGS | 5 1/2 inch U-bolts, flange nuts | Qty 12
F-1523 - AXLE RETAINER PLATES - 6 CYLINDER, EXCEPT 250 | Small head T-bolts, cad lock nuts | Qty 16
F-1616 - FRONT DRUM BRAKE ASSEMBLY TO SPINDLE | T-bolts, lock nuts | Qty 16
F-1480 - BRAKE BOOSTER TO FIREWALL | Hex split SEMS, flange nuts | Qty 5
F-575 - BRAKE CABLES TO BODY | Retaining clips, hex nuts | Qty 6
F-579 - BRAKE DRUM RETAINERS | Green push-on retainers | Qty 6
F-1249 - FRONT DRUM BRAKE HOSE BRACKETS TO BODY | HXWA C screws | Qty 4
F-577 - DRUM BRAKE HOSES TO BRACKET | U-clips | Qty 3
F-670 - BRAKE LIGHT SWITCH | Retaining pin | Qty 1
F-669 - BRAKE PLATE ADJUST HOLE PLUGS | Rubber plugs | Qty 2
F-596 - COIL SPRING SEATS / PERCHES | Lock nuts | Qty 4
F-1515 - LOWER CONTROL ARMS | Grade 8 cam bolts, red nuts, washers | Qty 8
F-3311 - UPPER CONTROL ARMS | Grade 8 1/2-13 knurled bolts, red nuts | Qty 12
F-1280 - FRONT TUBULAR CROSSMEMBER | Special hex countersunk bolts | Qty 2
F-785 - DIFFERENTIAL CARRIER TO HOUSING | Red lock nuts, copper washers | Qty 20
F-1273 - DRIVESHAFT - V8, 6 CYL 67-68 A/T, ALL 69 AND UP | 5/16 inch U-bolts, lock nuts | Qty 6
F-173 - ENGINE BODY BRACKETS - 6 CYLINDER | UBS flange bolts and nuts | Qty 12
F-174 - ENGINE INSULATOR - 6 CYLINDER | Lock nuts, flat washers | Qty 8
F-175 - ENGINE INSULATOR TO BLOCK - 6 CYLINDER | Hex split SEMS | Qty 6
F-1247 - SINGLE EXHAUST HANGERS | HXWA C screws | Qty 8
F-411 - GAS CAP - POP OPEN | Phillips flat A screws only | Qty 4
F-357 - GAS TANK | HXWA AB screws | Qty 11
F-571 - CHASSIS GREASE PLUGS | Hex plugs | Qty 9
F-1265 - IDLER ARM | Hex bolts, lock nuts, clipped washers | Qty 6
F-251 - LEAF SPRING MOUNTING AT FRONT | Flange bolts and nuts | Qty 4
F-1475 - MASTER CYLINDER WITH POWER BRAKES | Flange nuts | Qty 2
F-1473 - MASTER CYLINDER WITHOUT POWER BRAKES | Hex bolts, split washers | Qty 2
F-1333 - PARKING BRAKE CONTROL TO BODY | HXWA serrated screws | Qty 3
F-614 - PITMAN ARM TO GEAR BOX | Hex jam nut, split washer | Qty 2
F-798 - PROPORTIONING VALVE TO APRON | Flange nuts | Qty 2
F-665 - REAR SHACKLE ASSEMBLY - NUTS ONLY | Lock nuts | Qty 4
F-313 - FRONT SHOCK BRACKETS | Low-head carriage bolts, flange nuts | Qty 12
F-345 - FRONT SHOCKS | Hex external SEMS with Anchor marking, 5/16-18 nuts, washers | Qty 12
F-662 - FRONT STABILIZER BAR BRACKETS | UBS flange bolts and flange nuts | Qty 8
F-3950 - FRONT STABILIZER BAR END LINKS | Bolts, retainers, bushings, spacers, nuts | Qty 22
F-612 - STEERING COUPLING AFTER 11/4/68 | 12-point bolt, 5/16-18 lock nuts | Qty 3
F-1107 - STEERING GEAR BOX | Hex bolts, clipped flat washers, split washers | Qty 9
F-814 - STEERING LINKAGE WITH POWER STEERING | Slotted nuts, cotter pins, flat washers | Qty 23
F-660 - STRUT ROD THREADED ENDS TO BODY | Lock nuts, slotted nuts, pins | Qty 8
F-1264 - STRUT RODS TO LOWER CONTROL ARM | 1/2-13 special knurled bolts, nuts, pins | Qty 12
F-2960 - FRONT SUSPENSION BUMPERS | 5/16-18 lock nuts | Qty 2
F-1203 - TRANSMISSION CROSSMEMBER | Flange bolts, lock nuts, flat washers | Qty 5
F-1772 - WHEEL CYLINDERS - 170/200 | 1/4-20 hex external SEMS | Qty 8

VEHICLE FITMENT
1969 Ford Mustang
Fits 200 6-cylinder drum brake applications.
Designed for Mustang chassis, suspension, steering, drum brake, rear axle, drivetrain mounting, brake booster, fuel system, and related restoration applications.

COMMON USES
1969 Mustang chassis fastener replacement
200 6-cylinder Mustang suspension and steering restoration
Drum brake chassis hardware replacement
Rear axle, leaf spring, control arm, shock, stabilizer bar, and steering gear hardware restoration
Brake booster, master cylinder, proportioning valve, brake cable, and drum brake hardware replacement
Fuel tank, single exhaust hanger, transmission crossmember, and engine mount hardware replacement
Concours-quality and driver-quality Mustang restoration projects
Replacing missing, rusty, incorrect, or mismatched chassis fasteners

FAQ
Q: What does this master chassis kit fit?
A: This kit is designed for 1969 Ford Mustang 200 6-cylinder models with drum brakes.
Q: Is this an AMK Products kit?
A: Yes. This Master Chassis Kit is manufactured by AMK Products.
Q: How many pieces are included?
A: This kit includes 341 pieces.
Q: What areas does this kit cover?
A: This kit covers many chassis-related areas, including suspension, steering, drum brake mounting hardware, brake booster hardware, rear axle hardware, driveshaft hardware, engine and transmission mounting hardware, fuel tank hardware, single exhaust hangers, shock brackets, stabilizer bar hardware, and related underbody fasteners.
Q: Is this kit for a V8 Mustang?
A: No. This kit is for 1969 Mustang 200 6-cylinder drum brake applications.
Q: Is this good for concours restorations?
A: Yes. This kit is a strong choice for restorers who want OEM-correct fasteners and factory-style chassis detail.
Q: Where does this ship from?
A: Ships from Winchester, VA.

Manufactured by AMK Products.
Ships from Winchester, VA.
We won’t screw you, but our fasteners will.™