1969 Mustang Master Chassis Kit BOSS 429 Disc Brake

1969 Mustang Master Chassis Kit BOSS 429 Disc Brake | AMK 69Z-HDBG
Restore your 1969 Ford Mustang BOSS 429 disc brake chassis with this Master Chassis Kit from AMK Products. This kit includes OEM-correct fasteners for suspension, steering, disc brakes, rear axle, drivetrain mounting, fuel tank, dual exhaust hangers, brake booster hardware, power steering components, oil cooler hardware, and related chassis components.
Each fastener is selected for proper fit, finish, head marking, and factory-style appearance. This 367-piece kit is ideal for restorers replacing missing, rusty, incorrect, or mismatched chassis hardware while maintaining correct factory detail.

PRODUCT DETAILS
Application: 1969 Ford Mustang
Engine: BOSS 429
Brake Type: Disc Brake
Kit Type: Master Chassis Kit
Manufacturer: AMK Products
Fastener Style: OEM-correct chassis restoration hardware
Quantity: 367 pieces
SKU: 69Z-HDBG

WHAT’S INCLUDED
69Z-HDBG - MASTER CHASSIS KIT, 1969 MUSTANG DISC BRAKE BOSS 429 | Contains the sub-kits listed below | Qty 367
F-747 - ACCELERATOR BELLCRANK TO FIREWALL | HXWA AB screws | Qty 3
F-1404 - AXLE HOUSING TO SPRINGS | 5 1/2 inch U-bolts, flange nuts | Qty 12
F-1440 - AXLE RETAINER PLATES - 250 & 8 CYLINDER | T-bolts, red lock nuts | Qty 16
F-1480 - BRAKE BOOSTER TO FIREWALL | Hex split SEMS, flange nuts | Qty 5
F-575 - BRAKE CABLES TO BODY | Retaining clips, hex nuts | Qty 6
F-1263 - BRAKE CALIPERS TO SPINDLE | Drilled Grade 8 bolts, split washers | Qty 8
F-579 - BRAKE DRUM RETAINERS | Green push-on retainers | Qty 6
F-1757 - BRAKE HOSE TO AXLE HOUSING - 428CJ & BOSS | Hex bolt, split washer | Qty 2
F-1250 - DISC BRAKE HOSES TO BODY | HXWA C screws, U-clip | Qty 5
F-670 - BRAKE LIGHT SWITCH | Retaining pin | Qty 1
F-669 - BRAKE PLATE ADJUST HOLE PLUGS | Rubber plugs | Qty 2
F-1601 - BRAKE ROTOR SHIELDS | Hex external SEMS | Qty 6
F-596 - COIL SPRING SEATS / PERCHES | Lock nuts | Qty 4
F-1515 - LOWER CONTROL ARMS | Grade 8 cam bolts, red nuts, washers | Qty 8
F-3311 - UPPER CONTROL ARMS | Grade 8 1/2-13 knurled bolts, red nuts | Qty 12
F-1280 - FRONT TUBULAR CROSSMEMBER | Special hex countersunk bolts | Qty 2
F-785 - DIFFERENTIAL CARRIER TO HOUSING | Red lock nuts, copper washers | Qty 20
F-1273 - DRIVESHAFT - V8, 6 CYL 67-68 A/T, ALL 69 AND UP | 5/16 inch U-bolts, lock nuts | Qty 6
F-179 - ENGINE BODY BRACKETS - V8 | UBS flange bolts and nuts | Qty 12
F-187 - ENGINE INSULATOR & BLOCK BRACKETS - 390/428/429 | Special flange bolts, locknuts | Qty 10
F-1269 - ENGINE INSULATOR TO BODY BRACKETS - BOSS 429 | Special UBS flange bolts and nuts | Qty 4
F-865 - ENGINE OIL COOLER TO BODY | Hex conical and perimeter SEMS, serrated flange nut | Qty 4
F-1454 - DUAL EXHAUST HANGERS - TRANSVERSE MUFFLER | Carriage bolts, HXWA screws, flange nuts | Qty 20
F-411 - GAS CAP - POP OPEN | Phillips flat A screws only | Qty 4
F-357 - GAS TANK | HXWA AB screws | Qty 11
F-413 - GAS TANK FILLER NECK WITH TWIST CAP | HXWA B screws | Qty 5
F-571 - CHASSIS GREASE PLUGS | Hex plugs | Qty 9
F-1265 - IDLER ARM | Hex bolts, lock nuts, clipped washers | Qty 6
F-251 - LEAF SPRING MOUNTING AT FRONT | Flange bolts and nuts | Qty 4
F-1475 - MASTER CYLINDER WITH POWER BRAKES | Flange nuts | Qty 2
F-1362 - POWER STEERING CYLINDER BRACKET TO BODY | Hex bolts, lock nuts, washers | Qty 7
F-676 - POWER STEERING HOSE SUPPORT INSULATOR RETAINER | HXWA screws | Qty 2
F-1311 - POWER STEERING OIL COOLER - BOSS 302/429 & 428CJ | HXWA TT screw | Qty 1
F-1333 - PARKING BRAKE CONTROL TO BODY | HXWA serrated screws | Qty 3
F-614 - PITMAN ARM TO GEAR BOX | Hex jam nut, split washer | Qty 2
F-798 - PROPORTIONING VALVE TO APRON | Flange nuts | Qty 2
F-665 - REAR SHACKLE ASSEMBLY - NUTS ONLY | Lock nuts | Qty 4
F-313 - FRONT SHOCK BRACKETS | Low-head carriage bolts, flange nuts | Qty 12
F-345 - FRONT SHOCKS | Hex external SEMS with Anchor marking, 5/16-18 nuts, washers | Qty 12
F-662 - FRONT STABILIZER BAR BRACKETS | UBS flange bolts and flange nuts | Qty 8
F-3950 - FRONT STABILIZER BAR END LINKS | Bolts, retainers, bushings, spacers, nuts | Qty 22
F-612 - STEERING COUPLING AFTER 11/4/68 | 12-point bolt, 5/16-18 lock nuts | Qty 3
F-1107 - STEERING GEAR BOX | Hex bolts, clipped flat washers, split washers | Qty 9
F-335 - STEERING LINKAGE WITH POWER STEERING - 69 HD, ALL 70 | Slotted nuts, cotter pins, flat washers | Qty 23
F-660 - STRUT ROD THREADED ENDS TO BODY | Lock nuts, slotted nuts, pins | Qty 8
F-1264 - STRUT RODS TO LOWER CONTROL ARM | 1/2-13 special knurled bolts, nuts, pins | Qty 12
F-2957 - REAR SUSPENSION BUMPER | Lock nut | Qty 1
F-1203 - TRANSMISSION CROSSMEMBER | Flange bolts, lock nuts, flat washers | Qty 5
F-1741 - TRANSMISSION INSULATOR - M/T 390/428/429 | Pointed hex bolts, nuts, washers | Qty 8
F-1414 - TRANSMISSION INSULATOR - M/T EXCEPT 390/428 | Hex split SEMS, lock nuts, flat washers | Qty 6
F-356 - WHEEL CYLINDERS - 250 AND ALL 8 CYLINDER | 5/16-18 hex external SEMS | Qty 4

VEHICLE FITMENT
1969 Ford Mustang
Fits BOSS 429 disc brake applications.
Designed for Mustang chassis, suspension, steering, disc brake, rear axle, drivetrain mounting, brake booster, power steering, oil cooler, dual exhaust, and fuel system restoration applications.

COMMON USES
1969 Mustang BOSS 429 chassis fastener replacement
BOSS 429 suspension and steering restoration
Disc brake chassis hardware replacement
Brake caliper, brake rotor shield, brake hose, brake booster, master cylinder, and proportioning valve hardware replacement
Rear axle, leaf spring, control arm, shock, stabilizer bar, and steering gear hardware restoration
BOSS 429 engine mount, oil cooler, power steering, and transmission mounting hardware replacement
Fuel tank, dual exhaust hanger, transmission crossmember, and underbody hardware replacement
Concours-quality and driver-quality BOSS 429 restoration projects
Replacing missing, rusty, incorrect, or mismatched chassis fasteners

FAQ
Q: What does this master chassis kit fit?
A: This kit is designed for 1969 Ford Mustang BOSS 429 models with disc brakes.
Q: Is this an AMK Products kit?
A: Yes. This Master Chassis Kit is manufactured by AMK Products.
Q: How many pieces are included?
A: This kit includes 367 pieces.
Q: What areas does this kit cover?
A: This kit covers many chassis-related areas, including suspension, steering, disc brake mounting hardware, brake booster hardware, rear axle hardware, driveshaft hardware, BOSS 429 engine mounting hardware, oil cooler hardware, power steering hardware, fuel tank hardware, dual exhaust hangers, shock brackets, stabilizer bar hardware, and related underbody fasteners.
Q: Is this kit for small block 302/351 cars?
A: No. This kit is for 1969 Mustang BOSS 429 disc brake applications.
Q: Is this kit for drum brake cars?
A: No. This kit is for disc brake applications.
Q: Is this good for concours restorations?
A: Yes. This kit is a strong choice for restorers who want OEM-correct fasteners and factory-style chassis detail.
Q: Where does this ship from?
A: Ships from Winchester, VA.

Manufactured by AMK Products.
Ships from Winchester, VA.
We won’t screw you, but our fasteners will.™