1970-1971 Torino Master Chassis Kit 302/351 Drum Brake

1970-1971 Torino Master Chassis Kit 302/351 Drum Brake | AMK 70O-DRSB
Restore your 1970-1971 Ford Torino 302/351 V8 drum brake chassis with this Master Chassis Kit from AMK Products. This kit includes OEM-correct fasteners for suspension, steering, drum brakes, rear axle, drivetrain mounting, fuel tank, parking brake hardware, brake booster hardware, transmission mounting, and related chassis hardware.
Each fastener is selected for proper fit, finish, head marking, and factory-style appearance. This 308-piece kit is ideal for restorers replacing missing, rusty, incorrect, or mismatched chassis hardware while maintaining correct factory detail.

PRODUCT DETAILS
Application: 1970-1971 Ford Torino
Engine: 302/351 V8
Brake Type: Drum Brake
Kit Type: Master Chassis Kit
Manufacturer: AMK Products
Fastener Style: OEM-correct chassis restoration hardware
Quantity: 308 pieces
SKU: 70O-DRSB

WHAT’S INCLUDED
70O-DRSB - MASTER CHASSIS KIT, 1970-1971 TORINO DRUM BRAKE 302/351 | Contains the sub-kits listed below | Qty 308
F-1461 - ACCELERATOR BELLCRANK TO FIREWALL | HXWA AB screws | Qty 2
F-2886 - AXLE HOUSING TO SPRINGS - HD CHP, ELIM | 7.0 inch U-bolts, flange nuts | Qty 12
F-1440 - AXLE RETAINER PLATES - 250 & 8 CYLINDER | T-bolts, red lock nuts | Qty 16
F-1616 - FRONT DRUM BRAKE ASSEMBLY TO SPINDLE | T-bolts, lock nuts | Qty 16
F-1480 - BRAKE BOOSTER TO FIREWALL | Hex split SEMS, flange nuts | Qty 5
F-579 - BRAKE DRUM RETAINERS | Green push-on retainers | Qty 6
F-1249 - FRONT DRUM BRAKE HOSE BRACKETS TO BODY | HXWA C screws | Qty 4
F-577 - DRUM BRAKE HOSES TO BRACKET | U-clips | Qty 3
F-670 - BRAKE LIGHT SWITCH | Retaining pin | Qty 1
F-669 - BRAKE PLATE ADJUST HOLE PLUGS | Rubber plugs | Qty 2
F-596 - COIL SPRING SEATS / PERCHES | Lock nuts | Qty 4
F-1515 - LOWER CONTROL ARMS | Grade 8 cam bolts, red nuts, washers | Qty 8
F-3311 - UPPER CONTROL ARMS | Grade 8 1/2-13 knurled bolts, red nuts | Qty 12
F-785 - DIFFERENTIAL CARRIER TO HOUSING | Red lock nuts, copper washers | Qty 20
F-1273 - DRIVESHAFT - V8, 6 CYL 67-68 A/T, ALL 69 AND UP | 5/16 inch U-bolts, lock nuts | Qty 6
F-753 - ENGINE INSULATOR TO BODY BRACKETS - V8 | 4 3/4 inch bolts, flange nuts, flat washers | Qty 6
F-853 - ENGINE MOUNTS TO BODY - V8 | UBS flange bolts and nuts | Qty 16
F-1646 - GAS TANK | HXWA AB screws | Qty 14
F-1427 - GAS TANK FILLER NECK SEAL - 70-71 COMBO | Round washer AB screws, HXWA B screws | Qty 8
F-571 - CHASSIS GREASE PLUGS | Hex plugs | Qty 9
F-1265 - IDLER ARM | Hex bolts, lock nuts, clipped washers | Qty 6
F-251 - LEAF SPRING MOUNTING AT FRONT | Flange bolts and nuts | Qty 4
F-1473 - MASTER CYLINDER WITHOUT POWER BRAKES | Hex bolts, split washers | Qty 2
F-1849 - PARKING BRAKE CONTROL TO BODY | Hex perimeter SEMS | Qty 3
F-614 - PITMAN ARM TO GEAR BOX | Hex jam nut, split washer | Qty 2
F-799 - PROPORTIONING VALVE TO APRON | UBS flange nuts | Qty 2
F-3908 - FRONT SHOCK BRACKETS | Low-head carriage bolts, external KEPS nuts | Qty 12
F-810 - FRONT STABILIZER BAR BRACKETS | Hex conical SEMS, lock nuts | Qty 8
F-3950 - FRONT STABILIZER BAR END LINKS | Bolts, retainers, bushings, spacers, nuts | Qty 22
F-612 - STEERING COUPLING AFTER 11/4/68 | 12-point bolt, 5/16-18 lock nuts | Qty 3
F-350 - STEERING GEAR BOX | Hex bolts, clipped flat washers, split washers | Qty 9
F-335 - STEERING LINKAGE WITH POWER STEERING - 69 HD, ALL 70 | Slotted nuts, cotter pins, flat washers | Qty 23
F-661 - STRUT ROD THREADED ENDS TO BODY | Lock nuts | Qty 4
F-1264 - STRUT RODS TO LOWER CONTROL ARM | 1/2-13 special knurled bolts, nuts, pins | Qty 12
F-1488 - REAR SUSPENSION BUMPER BRACKET - 250 & 302 | HXWA C screws | Qty 2
F-1487 - REAR SUSPENSION BUMPER BRACKET - 250 & 302 | HXWA screws | Qty 2
F-2960 - FRONT SUSPENSION BUMPERS | 5/16-18 lock nuts | Qty 2
F-3904 - TRANSMISSION CROSSMEMBER | Pointed bolts, slotted nuts, washers, pins | Qty 8
F-1496 - TRANSMISSION INSULATOR - A/T & ALL 428CJ | Pointed hex bolts, flange nuts, washers | Qty 6
F-3912 - WHEEL CYLINDERS - 250 AND ALL 8 CYLINDER | 5/16-18 hex external SEMS | Qty 8

VEHICLE FITMENT
1970 Ford Torino
1971 Ford Torino
Fits 302/351 V8 drum brake applications.

COMMON USES
1970-1971 Torino chassis fastener replacement
302/351 V8 Torino suspension and steering restoration
Drum brake chassis hardware replacement
Brake assembly, brake hose, brake booster, master cylinder, proportioning valve, parking brake, and brake-related hardware replacement
Rear axle, leaf spring, control arm, shock, stabilizer bar, and steering gear hardware restoration
Fuel tank, gas tank filler neck seal, transmission crossmember, transmission insulator, and engine mount hardware replacement
Concours-quality and driver-quality Torino restoration projects
Replacing missing, rusty, incorrect, or mismatched chassis fasteners

FAQ
Q: What does this master chassis kit fit?
A: This kit is designed for 1970-1971 Ford Torino 302/351 V8 models with drum brakes.
Q: Is this an AMK Products kit?
A: Yes. This Master Chassis Kit is manufactured by AMK Products.
Q: How many pieces are included?
A: This kit includes 308 pieces.
Q: What areas does this kit cover?
A: This kit covers many chassis-related areas, including suspension, steering, drum brake mounting hardware, brake booster hardware, rear axle hardware, driveshaft hardware, engine and transmission mounting hardware, fuel tank hardware, parking brake hardware, shock brackets, stabilizer bar hardware, and related underbody fasteners.
Q: Is this kit for disc brake cars?
A: No. This kit is for drum brake applications.
Q: Is this kit for 6-cylinder cars?
A: No. This kit is for 302/351 V8 applications.
Q: Is this good for concours restorations?
A: Yes. This kit is a strong choice for restorers who want OEM-correct fasteners and factory-style chassis detail.
Q: Where does this ship from?
A: Ships from Winchester, VA.

Manufactured by AMK Products.
Ships from Winchester, VA.
We won’t screw you, but our fasteners will.™