1970-1971 Torino Master Chassis Kit 429 Disc Brake

1970-1971 Torino Master Chassis Kit 429 Disc Brake | AMK 70O-DCBB
Restore your 1970-1971 Ford Torino 429 V8 disc brake chassis with this Master Chassis Kit from AMK Products. This kit includes OEM-correct fasteners for suspension, steering, disc brakes, rear axle, drivetrain mounting, fuel tank, brake booster hardware, power steering components, power steering oil cooler hardware, transmission mounting, and related chassis components.
Each fastener is selected for proper fit, finish, head marking, and factory-style appearance. This 330-piece kit is ideal for restorers replacing missing, rusty, incorrect, or mismatched chassis hardware while maintaining correct factory detail.

PRODUCT DETAILS
Application: 1970-1971 Ford Torino
Engine: 429 V8
Brake Type: Disc Brake
Kit Type: Master Chassis Kit
Manufacturer: AMK Products
Fastener Style: OEM-correct chassis restoration hardware
Quantity: 330 pieces
SKU: 70O-DCBB

WHAT’S INCLUDED
70O-DCBB - MASTER CHASSIS KIT, 1970-1971 TORINO DISC BRAKE 429 | Contains the sub-kits listed below | Qty 330
F-1461 - ACCELERATOR BELLCRANK TO FIREWALL | HXWA AB screws | Qty 2
F-2886 - AXLE HOUSING TO SPRINGS - HD CHP, ELIM | 7.0 inch U-bolts, flange nuts | Qty 12
F-1440 - AXLE RETAINER PLATES - 250 & 8 CYLINDER | T-bolts, red lock nuts | Qty 16
F-1480 - BRAKE BOOSTER TO FIREWALL | Hex split SEMS, flange nuts | Qty 5
F-575 - BRAKE CABLES TO BODY | Retaining clips, hex nuts | Qty 6
F-1263 - BRAKE CALIPERS TO SPINDLE | Drilled Grade 8 bolts, split washers | Qty 8
F-579 - BRAKE DRUM RETAINERS | Green push-on retainers | Qty 6
F-1250 - DISC BRAKE HOSES TO BODY | HXWA C screws, U-clip | Qty 5
F-670 - BRAKE LIGHT SWITCH | Retaining pin | Qty 1
F-669 - BRAKE PLATE ADJUST HOLE PLUGS | Rubber plugs | Qty 2
F-1601 - BRAKE ROTOR SHIELDS | Hex external SEMS | Qty 6
F-596 - COIL SPRING SEATS / PERCHES | Lock nuts | Qty 4
F-1515 - LOWER CONTROL ARMS | Grade 8 cam bolts, red nuts, washers | Qty 8
F-3311 - UPPER CONTROL ARMS | Grade 8 1/2-13 knurled bolts, red nuts | Qty 12
F-785 - DIFFERENTIAL CARRIER TO HOUSING | Red lock nuts, copper washers | Qty 20
F-1273 - DRIVESHAFT - V8, 6 CYL 67-68 A/T, ALL 69 AND UP | 5/16 inch U-bolts, lock nuts | Qty 6
F-753 - ENGINE INSULATOR TO BODY BRACKETS - V8 | 4 3/4 inch bolts, flange nuts, flat washers | Qty 6
F-467 - ENGINE INSULATOR TO BODY BRACKETS - EXCEPT 70F 6 CYLINDER | 4 3/8 inch UBS flange bolts and nuts | Qty 4
F-1450 - ENGINE INSULATOR & BLOCK BRACKETS - 428/429 | Special flange bolts, lock nuts | Qty 10
F-853 - ENGINE MOUNTS TO BODY - V8 | UBS flange bolts and nuts | Qty 16
F-1646 - GAS TANK | HXWA AB screws | Qty 14
F-1427 - GAS TANK FILLER NECK SEAL - 70-71 COMBO | Round washer AB screws, HXWA B screws | Qty 8
F-571 - CHASSIS GREASE PLUGS | Hex plugs | Qty 9
F-1265 - IDLER ARM | Hex bolts, lock nuts, clipped washers | Qty 6
F-251 - LEAF SPRING MOUNTING AT FRONT | Flange bolts and nuts | Qty 4
F-1475 - MASTER CYLINDER WITH POWER BRAKES | Flange nuts | Qty 2
F-1362 - POWER STEERING CYLINDER BRACKET TO BODY | Hex bolts, lock nuts, washers | Qty 7
F-864 - POWER STEERING HOSE SUPPORT INSULATOR RETAINER | HXWA F screw | Qty 1
F-1311 - POWER STEERING OIL COOLER - BOSS 302/429 & 428CJ | HXWA TT screw | Qty 1
F-1849 - PARKING BRAKE CONTROL TO BODY | Hex perimeter SEMS | Qty 3
F-614 - PITMAN ARM TO GEAR BOX | Hex jam nut, split washer | Qty 2
F-799 - PROPORTIONING VALVE TO APRON | UBS flange nuts | Qty 2
F-666 - REAR SHACKLE ASSEMBLY - NUTS ONLY | UBS flange nuts | Qty 4
F-3908 - FRONT SHOCK BRACKETS | Low-head carriage bolts, external KEPS nuts | Qty 12
F-810 - FRONT STABILIZER BAR BRACKETS | Hex conical SEMS, lock nuts | Qty 8
F-3950 - FRONT STABILIZER BAR END LINKS | Bolts, retainers, bushings, spacers, nuts | Qty 22
F-612 - STEERING COUPLING AFTER 11/4/68 | 12-point bolt, 5/16-18 lock nuts | Qty 3
F-350 - STEERING GEAR BOX | Hex bolts, clipped flat washers, split washers | Qty 9
F-335 - STEERING LINKAGE WITH POWER STEERING - 69 HD, ALL 70 | Slotted nuts, cotter pins, flat washers | Qty 23
F-661 - STRUT ROD THREADED ENDS TO BODY | Lock nuts | Qty 4
F-1264 - STRUT RODS TO LOWER CONTROL ARM | 1/2-13 special knurled bolts, nuts, pins | Qty 12
F-2957 - REAR SUSPENSION BUMPER | Lock nut | Qty 1
F-2960 - FRONT SUSPENSION BUMPERS | 5/16-18 lock nuts | Qty 2
F-3904 - TRANSMISSION CROSSMEMBER | Pointed bolts, slotted nuts, washers, pins | Qty 8
F-1496 - TRANSMISSION INSULATOR - A/T & ALL 428CJ | Pointed hex bolts, flange nuts, washers | Qty 6
F-356 - WHEEL CYLINDERS - 250 AND ALL 8 CYLINDER | 5/16-18 hex external SEMS | Qty 4

VEHICLE FITMENT
1970 Ford Torino
1971 Ford Torino
Fits 429 V8 disc brake applications.

COMMON USES
1970-1971 Torino 429 chassis fastener replacement
429 V8 Torino suspension and steering restoration
Disc brake chassis hardware replacement
Brake caliper, brake rotor shield, brake hose, brake booster, master cylinder, and proportioning valve hardware replacement
Rear axle, leaf spring, control arm, shock, stabilizer bar, and steering gear hardware restoration
Power steering cylinder bracket, power steering hose support, and steering linkage hardware replacement
429 engine mounting, transmission crossmember, transmission insulator, fuel tank, and gas tank filler neck hardware replacement
Concours-quality and driver-quality Torino restoration projects
Replacing missing, rusty, incorrect, or mismatched chassis fasteners

FAQ
Q: What does this master chassis kit fit?
A: This kit is designed for 1970-1971 Ford Torino 429 V8 models with disc brakes.
Q: Is this an AMK Products kit?
A: Yes. This Master Chassis Kit is manufactured by AMK Products.
Q: How many pieces are included?
A: This kit includes 330 pieces.
Q: What areas does this kit cover?
A: This kit covers many chassis-related areas, including suspension, steering, disc brake mounting hardware, brake booster hardware, rear axle hardware, driveshaft hardware, 429 engine mounting hardware, fuel tank hardware, parking brake hardware, power steering hardware, shock brackets, stabilizer bar hardware, transmission mounting hardware, and related underbody fasteners.
Q: Is this kit for drum brake cars?
A: No. This kit is for disc brake applications.
Q: Is this kit for 302/351 cars?
A: No. This kit is for 429 V8 applications.
Q: Is this good for concours restorations?
A: Yes. This kit is a strong choice for restorers who want OEM-correct fasteners and factory-style chassis detail.
Q: Where does this ship from?
A: Ships from Winchester, VA.

Manufactured by AMK Products.
Ships from Winchester, VA.
We won’t screw you, but our fasteners will.™