1970 1971 Torino chassis bolts master kit 302 351 engine with front drums brakes
1970-1971 Torino Master Chassis Kit Drum Brake 302/351 | AMK 70O-DRSB
DESCRIPTION
Restore your 1970-1971 Ford Torino 302 or 351 drum brake chassis hardware with this Master Chassis Kit from AMK Products.
This kit includes OEM-correct fasteners for front drum brakes, suspension, steering, rear axle, drivetrain mounting, gas tank, parking brake, stabilizer bar, shocks, transmission crossmember, wheel cylinders, and related chassis components.
Each fastener is selected for proper fit, finish, head marking, and factory-style appearance.
This 308-piece kit is ideal for restorers replacing missing, rusty, incorrect, or mismatched chassis hardware while maintaining correct factory detail.
PRODUCT DETAILS
Application: 1970-1971 Ford Torino
Engine: 302 / 351
Brake Type: Drum Brake
Kit Type: Master Chassis Kit
Manufacturer: AMK Products
Fastener Style: OEM-correct chassis restoration hardware
Quantity: 308 pieces
SKU: 70O-DRSB
WHAT’S INCLUDED
70O-DRSB - MASTER CHASSIS KIT, 1970-1971 TORINO DRUM BRAKE 302/351 | Contains the sub-kits listed below | Qty 308
F-1461 - ACCEL BELLCRANK TO FIREWALL | HXWA AB screws | Qty 2
F-2886 - AXLE HOUSING TO SPRINGS - HD CHP, ELIMINATOR | 7.0 inch U-bolts, flange nuts | Qty 12
F-1440 - AXLE RETAINER PLATES - 250 & 8 CYL | T-bolts, red lock nuts | Qty 16
F-1616 - FRONT DRUM BRAKE ASSEMBLY TO SPINDLE | T-bolts, lock nuts | Qty 16
F-1480 - BRAKE BOOSTER TO FIREWALL | Hex split SEMS, flange nuts | Qty 5
F-579 - BRAKE DRUM RETAINERS | Green push-on retainers | Qty 6
F-1249 - FRONT DRUM BRAKE HOSE BRACKETS TO BODY | HXWA C screws | Qty 4
F-577 - DRUM BRAKE HOSES TO BRACKET | U-clips | Qty 3
F-670 - BRAKE LIGHT SWITCH | Retaining pin | Qty 1
F-669 - BRAKE PLATE ADJUST HOLE PLUGS | Rubber plugs | Qty 2
F-596 - COIL SPRING SEATS / PERCHES | Lock nuts | Qty 4
F-1515 - LOWER CONTROL ARMS | Grade 8 cam bolts, red nuts, washers | Qty 8
F-3311 - UPPER CONTROL ARMS | Grade 8 1/2-13 knurled bolts, red nuts | Qty 12
F-785 - DIFFERENTIAL CARRIER TO HOUSING | Red lock nuts, copper washers | Qty 20
F-1273 - DRIVESHAFT | 5/16 inch U-bolts, lock nuts | Qty 6
F-753 - ENGINE INSULATOR TO BODY BRACKETS - V8 | 4 3/4 inch bolts, flange nuts, flat washers | Qty 6
F-853 - ENGINE MOUNTS TO BODY - V8 | UBS flange bolts and nuts | Qty 16
F-1646 - GAS TANK | HXWA AB screws | Qty 14
F-1427 - GAS TANK FILLER NECK SEAL - 1970-1971 COMBO | Round washer AB screws, HXWA B screws | Qty 8
F-571 - GREASE PLUGS, CHASSIS | Hex plugs | Qty 9
F-1265 - IDLER ARM | Hex bolts, lock nuts, clipped washers | Qty 6
F-251 - LEAF SPRING MOUNTING AT FRONT | Flange bolts and nuts | Qty 4
F-1473 - MASTER CYLINDER WITHOUT POWER BRAKES | Hex bolts, split washers | Qty 2
F-1849 - PARKING BRAKE CONTROL TO BODY | Hex perimeter SEMS | Qty 3
F-614 - PITMAN ARM TO GEAR BOX | Hex jam nut, split washer | Qty 2
F-799 - PROPORTIONING VALVE TO APRON | UBS flange nuts | Qty 2
F-3908 - FRONT SHOCK BRACKETS | Low head carriage bolts, external KEPS nuts | Qty 12
F-810 - FRONT STABILIZER BAR BRACKETS | Hex conical SEMS, lock nuts | Qty 8
F-3950 - FRONT STABILIZER BAR END LINKS | Bolts, retainers, bushings, spacers, nuts | Qty 22
F-612 - STEERING COUPLING 11/4/68 AND LATER | 12-point bolt, 5/16-18 lock nuts | Qty 3
F-350 - STEERING GEAR BOX | Hex bolts, clipped flat washers, split washers | Qty 9
F-335 - STEERING LINKAGE WITH POWER STEERING - 1969 HD, ALL 1970 | Slotted nuts, cotter pins, flat washers | Qty 23
F-661 - STRUT ROD THREADED ENDS TO BODY | Lock nuts | Qty 4
F-1264 - STRUT RODS TO LOWER CONTROL ARM | 1/2-13 special knurled bolts, nuts, pins | Qty 12
F-1488 - REAR SUSPENSION BUMPER BRACKET - 250 & 302 | HXWA C screws | Qty 2
F-1487 - REAR SUSPENSION BUMPER BRACKET - 250 & 302 | HXWA screws | Qty 2
F-2960 - FRONT SUSPENSION BUMPERS | 5/16-18 lock nuts | Qty 2
F-3904 - TRANSMISSION CROSSMEMBER | Pointed bolts, slot nuts, washers, pins | Qty 8
F-1496 - TRANSMISSION INSULATOR - A/T & ALL 428CJ | Pointed hex bolts, flange nuts, washers | Qty 6
F-3912 - WHEEL CYLINDERS - 4, 250 & ALL 8 CYL | 5/16-18 hex external SEMS | Qty 8
VEHICLE FITMENT
1970 Ford Torino
1971 Ford Torino
Fits 302 / 351 drum brake applications.
COMMON USES
1970-1971 Torino chassis fastener replacement
Drum brake chassis hardware replacement
Brake assembly, brake hose bracket, brake hose retainer, brake drum retainer, master cylinder, proportioning valve, and wheel cylinder hardware replacement
Rear axle, differential carrier, driveshaft, leaf spring, shock, stabilizer bar, and suspension hardware restoration
Steering gear box, steering linkage, pitman arm, idler arm, steering coupling, and strut rod hardware replacement
Engine mount, transmission crossmember, gas tank, and filler neck hardware replacement
Concours-quality and driver-quality Torino restoration projects
Replacing missing, rusty, incorrect, or mismatched chassis fasteners
FAQ
Q: What does this master chassis kit fit?
A: This kit is designed for 1970-1971 Ford Torino models with 302 or 351 engines and drum brakes.
Q: Is this an AMK Products kit?
A: Yes. This Master Chassis Kit is manufactured by AMK Products.
Q: How many pieces are included?
A: This kit includes 308 pieces.
Q: What type of brakes is this kit for?
A: This kit is for drum brake applications.
Q: Is this kit for disc brake cars?
A: No. This listing is for drum brake Torino applications.
Q: What areas does this kit cover?
A: This kit covers many chassis-related areas, including drum brake hardware, suspension, steering, rear axle, driveshaft, shocks, stabilizer bar, engine mounting hardware, transmission crossmember hardware, gas tank hardware, and related underbody fasteners.
Q: Is this good for concours restorations?
A: Yes. This kit is a strong choice for restorers who want OEM-correct fasteners and factory-style chassis detail.
Q: Where does this ship from?
A: Ships from Winchester, VA.
Manufactured by AMK Products.
Ships from Winchester, VA.
We won’t screw you, but our fasteners will.™