1970 Mustang Master Chassis Kit 428CJ Disc Brake

1970 Mustang Master Chassis Kit 428CJ Disc Brake | AMK 70Z-HDBB
Restore your 1970 Ford Mustang 428 Cobra Jet disc brake chassis with this Master Chassis Kit from AMK Products. This kit includes OEM-correct fasteners for suspension, steering, disc brakes, rear axle, drivetrain mounting, fuel tank, dual exhaust hangers, brake booster hardware, power steering components, oil cooler hardware, and related chassis hardware.
Each fastener is selected for proper fit, finish, head marking, and factory-style appearance. This 364-piece kit is ideal for restorers replacing missing, rusty, incorrect, or mismatched chassis hardware while maintaining correct factory detail.

PRODUCT DETAILS
Application: 1970 Ford Mustang
Engine: 428 Cobra Jet
Brake Type: Disc Brake
Kit Type: Master Chassis Kit
Manufacturer: AMK Products
Fastener Style: OEM-correct chassis restoration hardware
Quantity: 364 pieces
SKU: 70Z-HDBB

WHAT’S INCLUDED
70Z-HDBB - MASTER CHASSIS KIT, 1970 MUSTANG DISC BRAKE 428CJ | Contains the sub-kits listed below | Qty 364
F-1461 - ACCELERATOR BELLCRANK TO FIREWALL | HXWA AB screws | Qty 2
F-1444 - AXLE HOUSING TO SPRINGS | 5 3/4 inch U-bolts, flange nuts | Qty 12
F-1440 - AXLE RETAINER PLATES - 250 & 8 CYLINDER | T-bolts, red lock nuts | Qty 16
F-1480 - BRAKE BOOSTER TO FIREWALL | Hex split SEMS, flange nuts | Qty 5
F-575 - BRAKE CABLES TO BODY | Retaining clips, hex nuts | Qty 6
F-1263 - BRAKE CALIPERS TO SPINDLE | Drilled Grade 8 bolts, split washers | Qty 8
F-579 - BRAKE DRUM RETAINERS | Green push-on retainers | Qty 6
F-1757 - BRAKE HOSE TO AXLE HOUSING - 428CJ & BOSS | Hex bolt, split washer | Qty 2
F-1250 - DISC BRAKE HOSES TO BODY | HXWA C screws, U-clip | Qty 5
F-670 - BRAKE LIGHT SWITCH | Retaining pin | Qty 1
F-669 - BRAKE PLATE ADJUST HOLE PLUGS | Rubber plugs | Qty 2
F-1601 - BRAKE ROTOR SHIELDS | Hex external SEMS | Qty 6
F-596 - COIL SPRING SEATS / PERCHES | Lock nuts | Qty 4
F-1515 - LOWER CONTROL ARMS | Grade 8 cam bolts, red nuts, washers | Qty 8
F-3311 - UPPER CONTROL ARMS | Grade 8 1/2-13 knurled bolts, red nuts | Qty 12
F-1280 - FRONT TUBULAR CROSSMEMBER | Special hex countersunk bolts | Qty 2
F-785 - DIFFERENTIAL CARRIER TO HOUSING | Red lock nuts, copper washers | Qty 20
F-1273 - DRIVESHAFT - V8, 6 CYL 67-68 A/T, ALL 69 AND UP | 5/16 inch U-bolts, lock nuts | Qty 6
F-467 - ENGINE INSULATOR TO BODY BRACKETS - EXCEPT 70F 6 CYLINDER | 4 3/8 inch UBS flange bolts and nuts | Qty 4
F-1450 - ENGINE INSULATOR & BLOCK BRACKETS - 428/429 | Special flange bolts, lock nuts | Qty 10
F-1314 - ENGINE MOUNTS TO BODY - V8 | UBS flange bolts and nuts | Qty 12
F-865 - ENGINE OIL COOLER TO BODY | Hex conical and perimeter SEMS, serrated flange nut | Qty 4
F-1454 - DUAL EXHAUST HANGERS - TRANSVERSE MUFFLER | Carriage bolts, HXWA screws, flange nuts | Qty 20
F-411 - GAS CAP - POP OPEN | Phillips flat A screws only | Qty 4
F-410 - GAS TANK | HXWA AB screws | Qty 11
F-413 - GAS TANK FILLER NECK WITH TWIST CAP | HXWA B screws | Qty 5
F-571 - CHASSIS GREASE PLUGS | Hex plugs | Qty 9
F-1265 - IDLER ARM | Hex bolts, lock nuts, clipped washers | Qty 6
F-251 - LEAF SPRING MOUNTING AT FRONT | Flange bolts and nuts | Qty 4
F-1475 - MASTER CYLINDER WITH POWER BRAKES | Flange nuts | Qty 2
F-1362 - POWER STEERING CYLINDER BRACKET TO BODY | Hex bolts, lock nuts, washers | Qty 7
F-676 - POWER STEERING HOSE SUPPORT INSULATOR RETAINER | HXWA screws | Qty 2
F-1333 - PARKING BRAKE CONTROL TO BODY | HXWA serrated screws | Qty 3
F-614 - PITMAN ARM TO GEAR BOX | Hex jam nut, split washer | Qty 2
F-799 - PROPORTIONING VALVE TO APRON | UBS flange nuts | Qty 2
F-666 - REAR SHACKLE ASSEMBLY - NUTS ONLY | UBS flange nuts | Qty 4
F-313 - FRONT SHOCK BRACKETS | Low-head carriage bolts, flange nuts | Qty 12
F-345 - FRONT SHOCKS | Hex external SEMS with Anchor marking, 5/16-18 nuts, washers | Qty 12
F-810 - FRONT STABILIZER BAR BRACKETS | Hex conical SEMS, lock nuts | Qty 8
F-3950 - FRONT STABILIZER BAR END LINKS | Bolts, retainers, bushings, spacers, nuts | Qty 22
F-868 - REAR STABILIZER BAR TO BODY | HXWA screws | Qty 4
F-612 - STEERING COUPLING AFTER 11/4/68 | 12-point bolt, 5/16-18 lock nuts | Qty 3
F-350 - STEERING GEAR BOX | Hex bolts, clipped flat washers, split washers | Qty 9
F-335 - STEERING LINKAGE WITH POWER STEERING - 69 HD, ALL 70 | Slotted nuts, cotter pins, flat washers | Qty 23
F-661 - STRUT ROD THREADED ENDS TO BODY | Lock nuts | Qty 4
F-1264 - STRUT RODS TO LOWER CONTROL ARM | 1/2-13 special knurled bolts, nuts, pins | Qty 12
F-2957 - REAR SUSPENSION BUMPER | Lock nut | Qty 1
F-1143 - TRANSMISSION CROSSMEMBER | UBS flange bolts and nuts | Qty 4
F-1496 - TRANSMISSION INSULATOR - A/T & ALL 428CJ | Pointed hex bolts, flange nuts, washers | Qty 6
F-356 - WHEEL CYLINDERS - 250 AND ALL 8 CYLINDER | 5/16-18 hex external SEMS | Qty 4

VEHICLE FITMENT
1970 Ford Mustang
Fits 428 Cobra Jet disc brake applications.
Designed for Mustang chassis, suspension, steering, disc brake, rear axle, drivetrain mounting, brake booster, power steering, oil cooler, dual exhaust, fuel system, and related restoration applications.

COMMON USES
1970 Mustang 428CJ chassis fastener replacement
428 Cobra Jet suspension and steering restoration
Disc brake chassis hardware replacement
Brake caliper, brake rotor shield, brake hose, brake booster, master cylinder, and proportioning valve hardware replacement
Rear axle, leaf spring, control arm, shock, stabilizer bar, and steering gear hardware restoration
428CJ engine mount, oil cooler, transmission insulator, power steering, and drivetrain hardware replacement
Fuel tank, dual exhaust hanger, transmission crossmember, and underbody hardware replacement
Concours-quality and driver-quality 428CJ Mustang restoration projects
Replacing missing, rusty, incorrect, or mismatched chassis fasteners

FAQ
Q: What does this master chassis kit fit?
A: This kit is designed for 1970 Ford Mustang 428 Cobra Jet models with disc brakes.
Q: Is this an AMK Products kit?
A: Yes. This Master Chassis Kit is manufactured by AMK Products.
Q: How many pieces are included?
A: This kit includes 364 pieces.
Q: What areas does this kit cover?
A: This kit covers many chassis-related areas, including suspension, steering, disc brake mounting hardware, brake booster hardware, rear axle hardware, driveshaft hardware, 428CJ engine mounting hardware, oil cooler hardware, power steering hardware, fuel tank hardware, dual exhaust hangers, shock brackets, stabilizer bar hardware, and related underbody fasteners.
Q: Is this kit for small block 302/351 cars?
A: No. This kit is for 1970 Mustang 428 Cobra Jet disc brake applications.
Q: Is this kit for drum brake cars?
A: No. This kit is for disc brake applications.
Q: Is this good for concours restorations?
A: Yes. This kit is a strong choice for restorers who want OEM-correct fasteners and factory-style chassis detail.
Q: Where does this ship from?
A: Ships from Winchester, VA.

Manufactured by AMK Products.
Ships from Winchester, VA.
We won’t screw you, but our fasteners will.™