1971-1973 Mustang Master Chassis Kit 250 Drum Brake

1971-1973 Mustang Master Chassis Kit 250 Drum Brake | AMK 71Z-DRSX
Restore your 1971-1973 Ford Mustang 250 6-cylinder drum brake chassis with this Master Chassis Kit from AMK Products. This kit includes OEM-correct fasteners for suspension, steering, drum brakes, rear axle, drivetrain mounting, fuel tank, fuel vapor system, exhaust hangers, brake booster hardware, and related chassis components.
Each fastener is selected for proper fit, finish, head marking, and factory-style appearance. This 317-piece kit is ideal for restorers replacing missing, rusty, incorrect, or mismatched chassis hardware while maintaining correct factory detail.

PRODUCT DETAILS
Application: 1971-1973 Ford Mustang
Engine: 250 6-Cylinder
Brake Type: Drum Brake
Kit Type: Master Chassis Kit
Manufacturer: AMK Products
Fastener Style: OEM-correct chassis restoration hardware
Quantity: 317 pieces
SKU: 71Z-DRSX

WHAT’S INCLUDED
71Z-DRSX - MASTER CHASSIS KIT, 1971-1973 MUSTANG DRUM BRAKE 250 | Contains the sub-kits listed below | Qty 317
F-1456 - ACCELERATOR BELLCRANK TO FIREWALL | HXWA AB screws, serrated flange nuts | Qty 6
F-1444 - AXLE HOUSING TO SPRINGS | 5 3/4 inch U-bolts, flange nuts | Qty 12
F-1440 - AXLE RETAINER PLATES - 250 & 8 CYLINDER | T-bolts, red lock nuts | Qty 16
F-1616 - FRONT DRUM BRAKE ASSEMBLY TO SPINDLE | T-bolts, lock nuts | Qty 16
F-1481 - BRAKE BOOSTER TO FIREWALL | Flange nuts | Qty 4
F-575 - BRAKE CABLES TO BODY | Retaining clips, hex nuts | Qty 6
F-579 - BRAKE DRUM RETAINERS | Green push-on retainers | Qty 6
F-1332 - FRONT DRUM BRAKE HOSE BRACKETS TO BODY | HXWA C screws | Qty 6
F-577 - DRUM BRAKE HOSES TO BRACKET | U-clips | Qty 3
F-670 - BRAKE LIGHT SWITCH | Retaining pin | Qty 1
F-854 - BRAKE PEDAL TO FIREWALL | Flange nuts | Qty 4
F-669 - BRAKE PLATE ADJUST HOLE PLUGS | Rubber plugs | Qty 2
F-596 - COIL SPRING SEATS / PERCHES | Lock nuts | Qty 4
F-1515 - LOWER CONTROL ARMS | Grade 8 cam bolts, red nuts, washers | Qty 8
F-3311 - UPPER CONTROL ARMS | Grade 8 1/2-13 knurled bolts, red nuts | Qty 12
F-785 - DIFFERENTIAL CARRIER TO HOUSING | Red lock nuts, copper washers | Qty 20
F-1273 - DRIVESHAFT - V8, 6 CYL 67-68 A/T, ALL 69 AND UP | 5/16 inch U-bolts, lock nuts | Qty 6
F-1498 - ENGINE BODY BRACKETS - 6 CYLINDER & FAIRLANE | UBS flange bolts and nuts | Qty 12
F-175 - ENGINE INSULATOR TO BLOCK - 6 CYLINDER | Hex split SEMS | Qty 6
F-467 - ENGINE INSULATOR TO BODY BRACKETS - EXCEPT 70F 6 CYLINDER | 4 3/8 inch UBS flange bolts and nuts | Qty 4
F-1247 - SINGLE EXHAUST HANGERS | HXWA C screws | Qty 8
F-754 - FUEL VAPOR STORAGE CANISTER | External KEPS nuts | Qty 3
F-1411 - GAS TANK | Carriage bolts, flange nuts | Qty 4
F-992 - GAS TANK FILLER NECK SEAL | Phillips pan B screws | Qty 4
F-301 - GAS TANK FILLER NECK WITH TWIST CAP | HXWA AB screw | Qty 5
F-571 - CHASSIS GREASE PLUGS | Hex plugs | Qty 9
F-1267 - IDLER ARM | Hex bolts, lock nuts, clipped washers | Qty 6
F-251 - LEAF SPRING MOUNTING AT FRONT | Flange bolts and nuts | Qty 4
F-1475 - MASTER CYLINDER WITH POWER BRAKES | Flange nuts | Qty 2
F-1473 - MASTER CYLINDER WITHOUT POWER BRAKES | Hex bolts, split washers | Qty 2
F-1333 - PARKING BRAKE CONTROL TO BODY | HXWA serrated screws | Qty 3
F-614 - PITMAN ARM TO GEAR BOX | Hex jam nut, split washer | Qty 2
F-799 - PROPORTIONING VALVE TO APRON | UBS flange nuts | Qty 2
F-1251 - FRONT SHOCK BRACKETS | Low-head carriage bolts, lock nuts | Qty 12
F-810 - FRONT STABILIZER BAR BRACKETS | Hex conical SEMS, lock nuts | Qty 8
F-3950 - FRONT STABILIZER BAR END LINKS | Bolts, retainers, bushings, spacers, nuts | Qty 22
F-612 - STEERING COUPLING AFTER 11/4/68 | 12-point bolt, 5/16-18 lock nuts | Qty 3
F-1442 - STEERING GEAR BOX | Hex bolts, flat washers | Qty 6
F-815 - STEERING LINKAGE | Slotted nuts, cotter pins | Qty 21
F-661 - STRUT ROD THREADED ENDS TO BODY | Lock nuts | Qty 4
F-1264 - STRUT RODS TO LOWER CONTROL ARM | 1/2-13 special knurled bolts, nuts, pins | Qty 12
F-1488 - REAR SUSPENSION BUMPER BRACKET - 250 & 302 | HXWA C screws | Qty 2
F-1143 - TRANSMISSION CROSSMEMBER | UBS flange bolts and nuts | Qty 4
F-3912 - WHEEL CYLINDERS - 250 AND ALL 8 CYLINDER | 5/16-18 hex external SEMS | Qty 8

VEHICLE FITMENT
1971 Ford Mustang
1972 Ford Mustang
1973 Ford Mustang
Fits 250 6-cylinder drum brake applications.
Designed for Mustang chassis, suspension, steering, drum brake, rear axle, drivetrain mounting, brake booster, fuel system, and related restoration applications.

COMMON USES
1971-1973 Mustang chassis fastener replacement
250 6-cylinder Mustang suspension and steering restoration
Drum brake chassis hardware replacement
Brake assembly, brake hose, brake booster, master cylinder, proportioning valve, brake pedal, and brake cable hardware replacement
Rear axle, leaf spring, control arm, shock, stabilizer bar, and steering gear hardware restoration
Fuel tank, fuel vapor canister, single exhaust hanger, transmission crossmember, and engine mount hardware replacement
Concours-quality and driver-quality Mustang restoration projects
Replacing missing, rusty, incorrect, or mismatched chassis fasteners

FAQ
Q: What does this master chassis kit fit?
A: This kit is designed for 1971-1973 Ford Mustang 250 6-cylinder models with drum brakes.
Q: Is this an AMK Products kit?
A: Yes. This Master Chassis Kit is manufactured by AMK Products.
Q: How many pieces are included?
A: This kit includes 317 pieces.
Q: What areas does this kit cover?
A: This kit covers many chassis-related areas, including suspension, steering, drum brake mounting hardware, brake booster hardware, brake pedal hardware, rear axle hardware, driveshaft hardware, engine and transmission mounting hardware, fuel tank hardware, fuel vapor canister hardware, exhaust hangers, shock brackets, stabilizer bar hardware, and related underbody fasteners.
Q: Is this kit for disc brake cars?
A: No. This kit is for 1971-1973 Mustang 250 6-cylinder drum brake applications.
Q: Is this kit for V8 cars?
A: No. This kit is for the 250 6-cylinder application.
Q: Is this good for concours restorations?
A: Yes. This kit is a strong choice for restorers who want OEM-correct fasteners and factory-style chassis detail.
Q: Where does this ship from?
A: Ships from Winchester, VA.

Manufactured by AMK Products.
Ships from Winchester, VA.
We won’t screw you, but our fasteners will.™