1971 Mustang Master Chassis Kit 429CJ Disc Brake

1971 Mustang Master Chassis Kit 429CJ Disc Brake | AMK 71Z-DCBB
Restore your 1971 Ford Mustang 429 Cobra Jet disc brake chassis with this Master Chassis Kit from AMK Products. This kit includes OEM-correct fasteners for suspension, steering, disc brakes, rear axle, drivetrain mounting, fuel tank, fuel vapor system, dual exhaust hangers, brake booster hardware, and related chassis components.
Each fastener is selected for proper fit, finish, head marking, and factory-style appearance. This 316-piece kit is ideal for restorers replacing missing, rusty, incorrect, or mismatched chassis hardware while maintaining correct factory detail.

PRODUCT DETAILS
Application: 1971 Ford Mustang
Engine: 429 Cobra Jet
Brake Type: Disc Brake
Kit Type: Master Chassis Kit
Manufacturer: AMK Products
Fastener Style: OEM-correct chassis restoration hardware
Quantity: 316 pieces
SKU: 71Z-DCBB

WHAT’S INCLUDED
71Z-DCBB - MASTER CHASSIS KIT, 1971 MUSTANG DISC BRAKE 429CJ | Contains the sub-kits listed below | Qty 316
F-1456 - ACCELERATOR BELLCRANK TO FIREWALL | HXWA AB screws, serrated flange nuts | Qty 6
F-1444 - AXLE HOUSING TO SPRINGS | 5 3/4 inch U-bolts, flange nuts | Qty 12
F-1440 - AXLE RETAINER PLATES - 250 & 8 CYLINDER | T-bolts, red lock nuts | Qty 16
F-1481 - BRAKE BOOSTER TO FIREWALL | Flange nuts | Qty 4
F-575 - BRAKE CABLES TO BODY | Retaining clips, hex nuts | Qty 6
F-1263 - BRAKE CALIPERS TO SPINDLE | Drilled Grade 8 bolts, split washers | Qty 8
F-579 - BRAKE DRUM RETAINERS | Green push-on retainers | Qty 6
F-1250 - DISC BRAKE HOSES TO BODY | HXWA C screws, U-clip | Qty 5
F-670 - BRAKE LIGHT SWITCH | Retaining pin | Qty 1
F-854 - BRAKE PEDAL TO FIREWALL | Flange nuts | Qty 4
F-669 - BRAKE PLATE ADJUST HOLE PLUGS | Rubber plugs | Qty 2
F-1601 - BRAKE ROTOR SHIELDS | Hex external SEMS | Qty 6
F-596 - COIL SPRING SEATS / PERCHES | Lock nuts | Qty 4
F-1515 - LOWER CONTROL ARMS | Grade 8 cam bolts, red nuts, washers | Qty 8
F-3311 - UPPER CONTROL ARMS | Grade 8 1/2-13 knurled bolts, red nuts | Qty 12
F-785 - DIFFERENTIAL CARRIER TO HOUSING | Red lock nuts, copper washers | Qty 20
F-1273 - DRIVESHAFT - V8, 6 CYL 67-68 A/T, ALL 69 AND UP | 5/16 inch U-bolts, lock nuts | Qty 6
F-467 - ENGINE INSULATOR TO BODY BRACKETS - EXCEPT 70F 6 CYLINDER | 4 3/8 inch UBS flange bolts and nuts | Qty 4
F-1450 - ENGINE INSULATOR & BLOCK BRACKETS - 428/429 | Special flange bolts, lock nuts | Qty 10
F-853 - ENGINE MOUNTS TO BODY - V8 | UBS flange bolts and nuts | Qty 16
F-1455 - DUAL EXHAUST HANGERS | HXWA C screws | Qty 12
F-754 - FUEL VAPOR STORAGE CANISTER | External KEPS nuts | Qty 3
F-1411 - GAS TANK | Carriage bolts, flange nuts | Qty 4
F-992 - GAS TANK FILLER NECK SEAL | Phillips pan B screws | Qty 4
F-301 - GAS TANK FILLER NECK WITH TWIST CAP | HXWA AB screw | Qty 5
F-571 - CHASSIS GREASE PLUGS | Hex plugs | Qty 9
F-1267 - IDLER ARM | Hex bolts, lock nuts, clipped washers | Qty 6
F-251 - LEAF SPRING MOUNTING AT FRONT | Flange bolts and nuts | Qty 4
F-1475 - MASTER CYLINDER WITH POWER BRAKES | Flange nuts | Qty 2
F-1333 - PARKING BRAKE CONTROL TO BODY | HXWA serrated screws | Qty 3
F-614 - PITMAN ARM TO GEAR BOX | Hex jam nut, split washer | Qty 2
F-799 - PROPORTIONING VALVE TO APRON | UBS flange nuts | Qty 2
F-1251 - FRONT SHOCK BRACKETS | Low-head carriage bolts, lock nuts | Qty 12
F-810 - FRONT STABILIZER BAR BRACKETS | Hex conical SEMS, lock nuts | Qty 8
F-3950 - FRONT STABILIZER BAR END LINKS | Bolts, retainers, bushings, spacers, nuts | Qty 22
F-868 - REAR STABILIZER BAR TO BODY | HXWA screws | Qty 4
F-612 - STEERING COUPLING AFTER 11/4/68 | 12-point bolt, 5/16-18 lock nuts | Qty 3
F-1442 - STEERING GEAR BOX | Hex bolts, flat washers | Qty 6
F-815 - STEERING LINKAGE | Slotted nuts, cotter pins | Qty 21
F-661 - STRUT ROD THREADED ENDS TO BODY | Lock nuts | Qty 4
F-1264 - STRUT RODS TO LOWER CONTROL ARM | 1/2-13 special knurled bolts, nuts, pins | Qty 12
F-2957 - REAR SUSPENSION BUMPER | Lock nut | Qty 1
F-1143 - TRANSMISSION CROSSMEMBER | UBS flange bolts and nuts | Qty 4
F-356 - WHEEL CYLINDERS - 250 AND ALL 8 CYLINDER | 5/16-18 hex external SEMS | Qty 4

VEHICLE FITMENT
1971 Ford Mustang
Fits 429 Cobra Jet disc brake applications.

COMMON USES
1971 Mustang 429CJ chassis fastener replacement
429 Cobra Jet suspension and steering restoration
Disc brake chassis hardware replacement
Brake caliper, brake rotor shield, brake hose, brake booster, brake pedal, master cylinder, and proportioning valve hardware replacement
Rear axle, leaf spring, control arm, shock, stabilizer bar, and steering gear hardware restoration
Fuel tank, fuel vapor canister, dual exhaust hanger, transmission crossmember, and big block engine mount hardware replacement
Concours-quality and driver-quality 429CJ Mustang restoration projects
Replacing missing, rusty, incorrect, or mismatched chassis fasteners

FAQ
Q: What does this master chassis kit fit?
A: This kit is designed for 1971 Ford Mustang 429 Cobra Jet models with disc brakes.
Q: Is this an AMK Products kit?
A: Yes. This Master Chassis Kit is manufactured by AMK Products.
Q: How many pieces are included?
A: This kit includes 316 pieces.
Q: What areas does this kit cover?
A: This kit covers many chassis-related areas, including suspension, steering, disc brake mounting hardware, brake booster hardware, brake pedal hardware, rear axle hardware, driveshaft hardware, big block engine and transmission mounting hardware, fuel tank hardware, fuel vapor canister hardware, dual exhaust hangers, shock brackets, stabilizer bar hardware, and related underbody fasteners.
Q: Is this kit for drum brake cars?
A: No. This kit is for 1971 Mustang 429CJ disc brake applications.
Q: Is this kit for small block 302/351 cars?
A: No. This kit is for the 429 Cobra Jet application.
Q: Is this good for concours restorations?
A: Yes. This kit is a strong choice for restorers who want OEM-correct fasteners and factory-style chassis detail.
Q: Where does this ship from?
A: Ships from Winchester, VA.

Manufactured by AMK Products.
Ships from Winchester, VA.
We won’t screw you, but our fasteners will.™